MOT Status
ValidMileage
138,649 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Headlamp has a product on the lens but not seriously reducing light output both sides (4.1.4 (b))
Nearside Front Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner/outer sills (5.3.6 (a) (i))
Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner/outer sills (5.3.6 (a) (i))
Nearside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Offside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Offside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))
Front Headlamp has a product on the lens but not seriously reducing light output both sides (4.1.4 (b))
Nearside Front Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner/outer sills (5.3.6 (a) (i))
Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner/outer sills (5.3.6 (a) (i))
Front Coil spring corroded (5.3.1 (b) (i))
Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Offside Front Side repeater not working (4.4.1 (a) (ii))
Nearside Rear Stop lamp(s) all not working (4.3.1 (a) (iii))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Front Headlamp aim not tested (4.1.2 (b))
Nearside Front Headlamp lens seriously defective (4.1.1 (b) (ii))
Offside Front Headlamp lens seriously defective (4.1.1 (b) (ii))
Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Tyre worn close to legal limit/worn on edge BOTH REAR (5.2.3 (e))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Suspension arm pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Headlamp aim too low (4.1.2 (a))
Front Suspension arm pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e))
Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e))
Front Brake pad(s) less than 1.5 mm thick both (3.5.1g)
Nearside Front Front position lamp(s) not working (1.1.A.3b)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Front position lamp(s) not working (1.1.A.3b)
Offside Rear Stop lamp not working (1.2.1b)
Front Bumper insecure ()
Front Brake pad(s) wearing thin (3.5.1g)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Front position lamp(s) not working (1.1.A.3b)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Under-trays fitted obscuring some underside components
How Reliable is the Honda Civic?
Based on 9,391,580 MOT tests across 693,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
RO10 AZD is a 2010 Honda Civic in Silver with a 1,339cc other engine. This vehicle has been through 24 MOT tests with a personal pass rate of 62.5%.
Across all 2010 Honda Civic models, the average MOT pass rate is 74.8% with a typical mileage of 69,488 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Honda Civic fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 307,913 recorded failures. If you're considering buying RO10 AZD, it's worth having these areas checked by a mechanic before committing.
The Honda Civic typically stays on UK roads for around 34 years. At 16 years old, this Honda Civic is still in the earlier part of its expected life.
Frequently Asked Questions
How do I check the history of RO10 AZD?
You can check the full history of RO10 AZD by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was RO10 AZD registered?
RO10 AZD is a 2010 Honda Civic, first registered on 3 March 2010.
Is RO10 AZD safe to buy?
The MOT history for RO10 AZD shows 24 tests with a 62.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does RO10 AZD have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on RO10 AZD. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.