2010 Ford S-max

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill area (5.3.6 (a) (i))

Offside Front Service brake fluctuating, but not excessively (1.2.1 (e))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive strut support area (5.3.6 (a) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill area (5.3.6 (a) (i))

Rear Axle Corroded

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Sub-frame is corroded but structural rigidity is not significantly reduced including suspension attachments (6.1.1 (c) (i))

Windscreen damaged but not adversely affecting driver's view bottom left hand side (3.2 (a) (i))

Exhaust emissions exceed manufacturer's specified limit plate value is 1.51 (8.2.2.2 (a))

Offside Rear Suspension arm corroded and seriously weakened (5.3.3 (b) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Windscreen wiper blade defective (3.4 (b) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill area (5.3.6 (a) (i))

Offside Front Service brake fluctuating, but not excessively (1.2.1 (e))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive strut support area (5.3.6 (a) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill area (5.3.6 (a) (i))

Rear Axle Corroded

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Sub-frame is corroded but structural rigidity is not significantly reduced including suspension attachments (6.1.1 (c) (i))

Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Exhaust emissions exceed default limit of 1.5m-1 (8.2.2.2 (b))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Exhaust heat shield insecure

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Due to major exhaust leak the smoke emissions will need to be rechecked during MOT retest

Exhaust heat shield insecure

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Nearside Front Windscreen wiper blade defective (3.4 (b) (i))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Front Windscreen wiper blade defective (3.4 (b) (i))

Offside Headlamp aim too high (4.1.2 (a))

Offside Track rod end ball joint has slight play (2.1.3 (b) (i))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Play in steering rack inner joint(s) ()

Offside Rear Brake cable damaged cable corroded and frayed (1.1.15 (a))

Offside Play in steering rack inner joint(s) ()

rear exhaust heat shield insecure

Nearside Front Tyre worn close to the legal limit outer edge bald (4.1.E.1)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement front bush (2.4.G.2)

Offside Front Tyre worn close to the legal limit outer edge bald (4.1.E.1)

Offside Play in steering rack inner joint(s) ()

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement front bush (2.4.G.2)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Play in steering rack inner joint(s) ()

Nearside Front Tyre has ply or cords exposed (4.1.D.1b)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Track rod end ball joint has excessive play (2.2.B.1f)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Play in steering rack inner joint(s) ()

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components

rear seats folded down

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components

rear seats folded down