2003 Mercedes-benz Vito

Front Brake disc significantly and obviously worn (1.1.14 (a) (i))

Nearside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL (5.3.6 (a) (i))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL (5.3.6 (a) (i))

Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL (5.3.6 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Front Headlamp light intensity severely reduced (4.1.4 (a))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Vehicle structure is corroded but structural rigidity is not significantly reduced Inner and outer nearside & offside (6.1.1 (c) (i))

Fuel cap/sealing device ineffective (6.1.3 (b) (i))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Front Headlamp not working on main beam (4.1.1 (a) (ii))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Vehicle structure is corroded but structural rigidity is not significantly reduced Inner and outer nearside & offside (6.1.1 (c) (i))

Horn not working (7.7 (a))

Rear Brake disc significantly and obviously worn (1.1.14 (a) (i))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Road wheel slightly distorted (5.2.2 (c) (i))

Offside Side repeater slightly discoloured (4.4.3 (a))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Headlamp aim too low (4.1.2 (a))

Offside Front Road wheel slightly distorted (5.2.2 (c) (i))

Offside Side repeater slightly discoloured (4.4.3 (a))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Windscreen washer not working (3.5 (a))

Offside Inner Prop shaft joint constant velocity boot missing (6.1.7 (g) (ii))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Headlamp aim projected beam image is obviously incorrect bulb in wrong (4.1.2 (c))

Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Registration plate lamp not working (1.1.C.1d)

Offside Headlamp not working on dipped beam (1.7.5a)

Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)

Exhaust system not adequately supported (7.1.1)

Front registration plate deteriorated (6.3.1d)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

imbalance and variation front brakes

Exhaust system not adequately supported (7.1.1)

Nearside Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.2.C.1c)

Offside Ball joint has excessive play (2.2.B.1f)

Offside Track rod end ball joint has excessive play (2.2.B.1f)

imbalance and variation front brakes

Offside Front Suspension arm locating pin insecure (2.4.G.3a)

Hole in gearbox casing! Gearbox void of oil!

nearside track rod end dust cover split