2013 Hyundai I10

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Items removed from driver's view prior to test ()

Oil leak, but not excessive at gearbox (8.4.1 (a) (i))

Nearside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Front Brakes imbalanced across an axle by more than 50% (1.2.1 (b) (ii)) DANGEROUS

Front Brake disc worn, but not excessively discs worn ( lipped) (1.1.14 (a) (i))

Items removed from driver's view prior to test ()

Oil leak, but not excessive at gearbox (8.4.1 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Items removed from driver's view prior to test ()

Nearside Rear Brake pipe corroded, covered in grease or other material corroded (1.1.11 (c))

Nearside Rear shocker casing corroded

Offside Rear shocker casing corroded

Offside Headlamp aim unable to be tested due to being insecure (4.1.2 (b))

Offside Headlamp insecure (4.1.1 (c))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Items removed from driver's view prior to test ()

Nearside Rear Brake pipe corroded, covered in grease or other material corroded (1.1.11 (c))

Nearside Rear shocker casing corroded

Offside Rear shocker casing corroded

Rear wiper rubber split

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Offside Front Brake pipe slightly damaged (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Brake pipe excessively corroded Front To Rear (1.1.11 (c))

Nearside Front Brake pipe excessively corroded (1.1.11 (c))

Offside Brake pipe excessively corroded Front To Rear (1.1.11 (c))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Offside Front Brake pipe slightly damaged (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Items removed from driver's view prior to test ()

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Items removed from driver's view prior to test ()

Brake pedal wearing smooth (1.1.2 (c))

Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Brake pad(s) wearing thin FRONT PADS (1.1.13 (a) (ii))

Brake pedal wearing smooth (1.1.2 (c))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front light scratches on inside of screen