2002 Yamaha DT125

Horn not working (7.7 (a) (ii))

Rear Brake rod insecure split pin missing (1.1.15 (c))

Front Headlamp aim too high (4.1.2 (a))

Front Position lamp not working (4.2.1 (a))

Front Steering headbearing has excessive wear or free play Notchy in operation as well as excessive freeplay. (2.2.2 (f) (i))

Front Wheel bearing has excessive play (5.1.3 (a) (i))

Nearside Rear Footrest missing pillion footrest missing. (6.2.12 (a))

Offside Rear Footrest missing Pillion footrest missing. (6.2.12 (a))

Rear Drive chain worn to excess (6.1.7 (c) (i))

Rear Position lamp light intensity significantly reduced Less than 50% of LED'S working. (4.2.3 (a) (ii))

Rear Registration plate lamp missing in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Rear Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) DANGEROUS

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Nearside Rear Chain guard missing ()

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Front wheel bearings have slight free play (2.3.5b)

Rear lamp poor illumination

Rear position lamp slightly affected by the operation of another lamp (1.1.3b)

Steering movement slightly 'notchy' (2.2.1b)

Drive chain slightly loose (6.2.1d)

Drive chain worn but not considered excessive (6.2.1e)

Front Brake disc(s) slightly worn (3.2.A1l)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Wheel has a slightly distorted bead rim. (4.2.2)

Front Wheel spoke slightly loose. (4.2.1b)

Front wheel bearings have slight free play (2.3.5b)

Rear Wheel has a slightly distorted bead rim. (4.2.2)

Steering headbearing has slight free play (2.2.2)

no wing mirror

Headlamp aim too high (1.6)

Headlamp aim too high (1.6)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Drive chain slightly loose (6.2.1d)

Drive chain worn but not considered excessive (6.2.1e)

Front Brake disc(s) slightly worn (3.2.A1l)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Wheel has a slightly distorted bead rim. (4.2.2)

Front Wheel spoke slightly loose. (4.2.1b)

Front wheel bearings have slight free play (2.3.5b)

Rear Wheel has a slightly distorted bead rim. (4.2.2)

no wing mirror

Front Fairings insecure but not likely to impede the steering mudguard bolts missing (2.1.2e)

Wheel has a slightly distorted bead rim. (4.2.2)

Direction indicators flashing more than 120 times per minute all (1.5.1c)

Floor brake test Neither brake control achieves an efficiency of 25% (3.3.C1b)

Front Brake hose is likely to be fouled or trapped by moving parts (3.2.B2c)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Nearside Lower Front wheel spindle securing nut locking device missing (2.3.3a)

Rear wheel spindle securing nut locking device missing (2.4.A.2b)

Front Fairings insecure but not likely to impede the steering mudguard bolts missing (2.1.2e)

Wheel has a slightly distorted bead rim. (4.2.2)

speedometer cable route incorrect

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front shock absorber seal failed and leaking oil (2.3.3)

Headlamp aim not tested (1.6)

Horn not loud enough to be heard by another road user (1.7.3a)

Rear Direction indicator not working (1.5.1c)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear suspension movement is excessively stiff (2.4.A.3b)

Drive chain slightly loose (6.2.1d)

Front wheel bearings have slight free play (2.3.5b)

Rear Brake disc(s) has slight run out (3.2.A1m)

Front Stop lamp missing (1.3.3a)

Front position lamp does not illuminate immediately when switched on (1.1.3a)

Headlamp aim too low (1.6)

Horn not loud enough to be heard by another road user (1.7.3a)

Nearside Front shock absorber seal failed and leaking oil (2.3.3)

Nearside Rear Direction indicator not working (1.5.1c)

Nearside Rear Footrest missing (6.2.1a)

Offside Front Direction indicator not working (1.5.1c)

Offside Front shock absorber seal failed and leaking oil (2.3.3)

Offside Rear Direction indicator not working (1.5.1c)

Offside Rear Footrest missing (6.2.1a)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Exhaust noisy (7.1.2)

Front Steering headbearing has slight free play (2.2.2)

Front Tyre worn close to the legal limit (4.1.3(ii))

Front Wheel has a slightly distorted bead rim. (4.2.2)

Rear Wheel has a slightly distorted bead rim. (4.2.2)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Rear wheel bearings have slight free play (2.4.A.2c)

Goodridge brake hose fitted

Rear suspension bush has slight free play (2.4.A2a(i))

Brake reaction bracket securing bolt(s) missing (3.2.A1j)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Nearside Front shock absorber seal failed and leaking oil (2.3.3)

Offside Front Footrest insecure (6.2.1a)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Goodridge brake hose fitted

Rear suspension bush has slight free play (2.4.A2a(i))

clutch lever fouling carburetor

fork seal dust covers missing

Front Brake fluid reservoir fluid level dangerously low (3.2.B1d)

Front Exhaust mounting does not fully support the exhaust system (7.1.1.c)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Horn not working (1.7.3a)

Rear Brake fluid reservoir fluid level dangerously low (3.2.B1d)

Rear Roller brake test indicates a binding brake (3.3.A1a)

clutch lever fouling carburetor

fork seal dust covers missing

Nearside Handlebar handgrip not secure to handlebars. (2.1.1c)

Offside Handlebar handgrip not secure to handlebars. (2.1.1c)

Rear Exhaust noisy (7.1.2)

Front Front position lamp missing (1.1.1a)

Front Horn not loud enough to be heard by another road user (1.7.3a)

Front position lamp does not illuminate immediately when switched on (1.1.3a)

Offside Exhaust mounting does not fully support the exhaust system (7.1.1.c)

Rear Rear position lamp obscured more than 50% (1.1.1d)

Rear Rear reflector on motorcycle missing (1.4.1)

Rear Registration plate letter/figure missing (6.3.1c)

Rear Exhaust noisy (7.1.2)

Drive chain worn but not considered excessive (6.2.1e)

Front Brake disc(s) slightly worn (3.2.A1l)

Rear suspension bush has slight free play (2.4.A2a(i))

Front Wheel spoke excessively loose (4.2.1b)

Front wheel bearings have excessive free play (2.3.5b)

Drive chain worn but not considered excessive (6.2.1e)

Front Brake disc(s) slightly worn (3.2.A1l)

Rear suspension bush has slight free play (2.4.A2a(i))