2006 Honda Accord

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge inner edge (5.2.3 (e))

Nearside Rear Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Offside Front Inner Tyre worn close to legal limit/worn on edge edge (5.2.3 (e))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Nearside Headlamp light intensity severely reduced bulb (4.1.4 (a))

Nearside Rear Anti-roll bar attachment bracket/mounting insecure drop link nut (5.3.3 (a) (i))

Offside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge inner edge (5.2.3 (e))

Nearside Rear Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Offside Front Inner Tyre worn close to legal limit/worn on edge edge (5.2.3 (e))

Welding repairs covered in underseal

Nearside Headlamp has a product on the light source so that the light output is severely reduced (4.1.4 (b))

Nearside Rear Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Brake disc significantly and obviously worn (1.1.14 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Nearside Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Offside Front Outer Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge edges (5.2.3 (e))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Fuel system component leaking (6.1.3 (b) (i))

Offside Rear Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Rear Inner Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

V.S.A lamp illuminated

Exhaust silencer corroded

V.S.A lamp illuminated

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Stop lamp not working (1.2.1b)

Nearside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Offside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Nearside Rear Anti-roll bar has excessive play in a ball joint (2.4.G.2)

Nearside Rear Rear position lamp(s) not working (1.1.A.3b)

Offside Rear Anti-roll bar has excessive play in a ball joint (2.4.G.2)

Nearside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Offside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

osf tyre low on edge

Nearside Front Front suspension has excessive play in a upper suspension ball joint (2.5.B.1a)

Offside Front Front suspension has excessive play in a upper suspension ball joint (2.5.B.1a)

osf tyre low on edge

Nearside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Rear Discs Corroded and Worn And Pads Getting Low