2012 Mazda 6

Offside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting floor pan holed (6.2.2 (d) (i))

Rear Sub-frame corroded and seriously weakened (5.3.3 (b) (i))

Offside Rear Sub-frame fractured (5.3.3 (b) (ii)) DANGEROUS

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Offside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Suspension arm fractured (5.3.3 (b) (ii)) DANGEROUS

Offside Rear Suspension arm fractured (5.3.3 (b) (ii)) DANGEROUS

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

heavy surface corrosion on rear subframe.

under trays fitted and plastic covering sills unable to fully check underside.

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

heavy surface corrosion on rear subframe.

under trays fitted and plastic covering sills unable to fully check underside.

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Sub-frame corroded but not seriously weakened & Suspension Components (5.3.3 (b) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Sub-frame corroded but not seriously weakened & Suspension Components (5.3.3 (b) (i))

Nearside Front Windscreen wiper blade defective (3.4 (b) (i))

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

rear subframe corroded

Brake hose has slight corrosion to ferrule All (1.1.12 (f) (i))

Coil spring corroded All four (5.3.1 (b) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension arm corroded but not seriously weakened All (5.3.3 (b) (i))

Anti-roll bar corroded but not seriously weakened front and rear (2.4.G.1)

Anti-roll bar linkage corroded but not seriously weakened all four (2.4.G.1)

Engine cover and under trays fitted at time of test.

Nearside Rear brake slightly binding.

Offside Front brake slightly binding.

Radius arm corroded but not seriously weakened all (2.4.G.1)

Sub-frame corroded but not seriously weakened front and rear (2.4.G.1)

coil spring corroded all four (2.4.C.1b)

Anti-roll bar corroded but not seriously weakened front and rear (2.4.G.1)

Anti-roll bar linkage corroded but not seriously weakened all four (2.4.G.1)

Engine cover and under trays fitted at time of test.

Nearside Rear brake slightly binding.

Offside Front brake slightly binding.

Offside Headlamp aim too low (1.8)

Radius arm corroded but not seriously weakened all (2.4.G.1)

Sub-frame corroded but not seriously weakened front and rear (2.4.G.1)

coil spring corroded all four (2.4.C.1b)

Brake hose has slight corrosion to ferrules all (3.6.B.4e)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

manufactures engine covers fitted preventing full inspection of some engine bay components

manufactures sill covers fitted preventing full inspection of sills

manufactures under trays fitted preventing full inspection of some underside components

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Brake hose has slight corrosion to ferrules all (3.6.B.4e)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

manufactures engine covers fitted preventing full inspection of some engine bay components

manufactures sill covers fitted preventing full inspection of sills

manufactures under trays fitted preventing full inspection of some underside components

Offside Rear Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components