2008 Ford Ka

Nearside Front Inner Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Nearside Front Outer Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Inner Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Offside Outer Integral body structure is corroded but structural rigidity is not significantly reduced Seal has started to corrode through. (6.1.1 (c) (i))

Brake pedal has insufficient reserve travel (1.1.2 (a))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Nearside Front Inner Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Nearside Front Outer Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Inner Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Offside Outer Integral body structure is corroded but structural rigidity is not significantly reduced Seal has started to corrode through. (6.1.1 (c) (i))

Offside Rear Tyre slightly damaged (5.2.3 (d) (ii))

Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front tyre wearing on outer edge

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive axle to body mount (5.3.6 (a) (i))

Offside Suspension component mounting prescribed area is corroded but not considered excessive subframe mount (5.3.6 (a) (i))

Offside sill holed due to corrosion but not in prescribed area

Rear Tyre slightly damaged/cracking or perishing both (5.2.3 (d) (ii))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear axle to body mount (5.3.6 (a) (i))

Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Rear Position lamp not working (4.2.1 (a) (ii))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front tyre wearing on outer edge

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive axle to body mount (5.3.6 (a) (i))

Offside Suspension component mounting prescribed area is corroded but not considered excessive subframe mount (5.3.6 (a) (i))

Offside sill holed due to corrosion but not in prescribed area

Rear Tyre slightly damaged/cracking or perishing both (5.2.3 (d) (ii))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside corrosion starting on sill

Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside corrosion starting on sill

Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

both front wipers slightly smearing the windscreen

Nearside Front Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Headlamp aim too low (1.8)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Headlamp aim too low (1.8)

Offside Registration plate lamp not working (1.1.C.1d)

Offside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

n/s rear tyre slightly perished

o/s rear tyre slightly perished