2010 Citroen Dispatch

Front Drive shaft joint constant velocity boot severely deteriorated n/s and o/s (6.1.7 (g) (i))

Front Integral body structure is corroded but structural rigidity is not significantly reduced n/s and o/s (6.1.1 (c) (i))

Front Macpherson strut corroded but not seriously weakened x 2 (5.3.3 (b) (i))

Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced n/s and o/s (6.1.1 (c) (i))

Rear Suspension component corroded but not seriously weakened axle beam (5.3.3 (b) (i))

Rear Suspension component corroded but not seriously weakened axle beam (5.3.3 (b) (i))

Rear Suspension component pin or bush slightly worn n/s and o/s (5.3.4 (a) (i))

Exhaust mounting defective (6.1.2 (a))

Front Integral body structure is corroded but structural rigidity is not significantly reduced n/s and o/s outriggers (6.1.1 (c) (i))

Front Macpherson strut corroded but not seriously weakened x 2 (5.3.3 (b) (i))

Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Rear Suspension component corroded but not seriously weakened axle beam (5.3.3 (b) (i))

Suspension arm pin or bush worn but not resulting in excessive movement n/s and o/s (5.3.4 (a) (i))

Exhaust mounting defective (6.1.2 (a))

Front Macpherson strut corroded but not seriously weakened x 2 (5.3.3 (b) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced n/s and o/s outriggers/jacking points (6.1.1 (c) (i))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Rear Suspension arm corroded but not seriously weakened n/s , o/s and rear axle beam (5.3.3 (b) (i))

Rear Suspension arm pin or bush worn but not resulting in excessive movement n/s and o/s (5.3.4 (a) (i))

Nearside Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Tyre slightly damaged/cracking or perishing front and rear (5.2.3 (d) (ii))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear All direction indicators slightly discoloured (4.4.3 (a))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Rear Suspension arm corroded but not seriously weakened o/s and n/s (5.3.3 (b) (i))

Direction indicator slightly discoloured (4.4.3 (a))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

corrosion rear axle beam and arms

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Direction indicator slightly discoloured (4.4.3 (a))

Rear Suspension arm corroded but not seriously weakened n/s and o/s (5.3.3 (b) (i))

Offside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Direction indicator slightly discoloured (4.4.3 (a))

Rear Suspension arm corroded but not seriously weakened n/s and o/s (5.3.3 (b) (i))

Nearside Front Suspension arm ball joint dust cover severely deteriorated small cut in gaitor (5.3.4 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front pad wear sensor wiring rubbed through

Offside Rear Direction indicator slightly discoloured (4.4.3 (a))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Offside Rear Tyre has a bulge, caused by separation or partial failure of its structure 215/65/15c (5.2.3 (d) (ii)) DANGEROUS

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Suspension arm ball joint dust cover severely deteriorated small cut in gaitor (5.3.4 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front pad wear sensor wiring rubbed through

Offside Rear Direction indicator slightly discoloured (4.4.3 (a))

Nearside Rear Tyre slightly damaged/cracking or perishing 215/65r15 (5.2.3 (d) (ii))

Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Power steering fluid level below minimum (2.1.5 (b) (i))

Nearside Rear Direction indicator slightly discoloured (4.4.3 (a))

Offside Rear Direction indicator slightly discoloured (4.4.3 (a))

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)