2013 Ksr Moto Worx 125

Front Brake hose excessively damaged (1.1.12 (b) (ii))

Engine oil not visible in inspection window, advise attention.

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Brake hose slightly deteriorated Perished (1.1.12 (b) (ii))

Gear lever pivots worn

Handle bars slightly misaligned.

Nearside Rear Road spring corroded (5.3.1 (b) (i))

Offside Rear Road spring corroded (5.3.1 (b) (i))

Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Throttle housing slightly loose.

Nearside Rear Footrest missing (6.2.12 (a))

Offside Rear Footrest missing (6.2.12 (a))

Rear Tyre is unsuitable Front tyre fitted to rear. (5.2.3 (a))

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Engine oil not visible in inspection window, advise attention.

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Brake hose slightly deteriorated Perished (1.1.12 (b) (ii))

Gear lever pivots worn

Handle bars slightly misaligned.

Nearside Rear Road spring corroded (5.3.1 (b) (i))

Offside Rear Road spring corroded (5.3.1 (b) (i))

Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Throttle housing slightly loose.

Drive chain slightly tight (6.1.7 (k) (i))

Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Front Brake lever is short but brake can still be readily applied (1.1.2 (d))

Headlamp slightly discoloured (4.1.4 (a))

Offside Front INDICATOR LENS MISSING NOT AFFECTING THE LIGHT

SLIGHT PLAY IN GEAR BLEVER PIVOT

Handlebar excessively deformed (2.2.1 (c) (i))

Drive chain slightly tight (6.1.7 (k) (i))

Front Brake lever is short but brake can still be readily applied (1.1.2 (d))

Headlamp slightly discoloured (4.1.4 (a))

Offside Front INDICATOR LENS MISSING NOT AFFECTING THE LIGHT

SLIGHT PLAY IN GEAR BLEVER PIVOT

Offside Front indicator lens missing

Shock absorber has negligible damping effect forks have no movement or damping (5.3.2 (b))

Suspension arm pin or bush excessively worn swing arm bushes worn (5.3.4 (a) (i))

Handlebar grip insecure to handlebar r/h switch mech not secure (2.2.1 (d) (ii)) DANGEROUS

Rear Tyre tread not clearly visible (5.2.3 (e)) DANGEROUS

Offside Front indicator lens missing

Drive chain worn to excess (6.1.7 (c) (i))

Front Shock absorber has negligible damping effect (5.3.2 (b))

Rear Brake excessively binding (1.2.1 (f))

Suspension component pin or bush excessively worn (5.3.4 (a) (i))

Rear Drive chain sprocket so worn it is likely to fail (6.1.7 (c) (ii)) DANGEROUS

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Rear Brake binding but not excessively (1.2.1 (f))

Front Brake lever is short but brake can still be readily applied (1.1.2 (d))