2016 Lexmoto Xflm

Front Brake lever has insufficient reserve travel (1.1.2 (a))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Registration plate lamp does not illuminate simultaneously with the position lamp(s) (4.7.2 (a))

Wheel spindle loose (5.2.1 (c) (i))

Exhaust noisy (8.1.1 (a))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

revs up on its own

Front Position lamp not working (4.2.1 (a))

Front Wheel bearing has excessive play (5.1.3 (a) (i))

Exhaust noisy (8.1.1 (a))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

revs up on its own

Headlamp aim unable to be tested (4.1.2 (b))

Headlamp not working on dipped beam (4.1.1 (a) (ii))

Headlamp not working on main beam (4.1.1 (a) (ii))

Position lamp missing bulb not fitted (4.2.1 (a))

Rear Tyre fouling another component inner edge of exhaust silencer (5.2.3 (f))

Shock absorber insecurely attached top shock mount nut not done up correctly (5.3.2 (a) (i))

Upper Shock absorber has an excessively worn bush (5.3.2 (c))

Exhaust noisy (8.1.1 (a))

Exhaust slightly loose (6.1.2 (a))

Rear Brake indicates a slightly grabbing brake (1.2.1 (c))

Rear Brake pedal has slight side movement indicating a worn pedal bearing or pivot (1.1.1 (b))

Rear Suspension arm pin or bush excessively worn all suspension bushes (5.3.4 (a) (i))

Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))

Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) DANGEROUS

Brake pedal has slight side movement indicating a worn pedal bearing or pivot (1.1.1 (b))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

unable to check exhaust system for leaks or noise

unable to check throttle opperation

unable to start bike

Headlamp light intensity reduced (4.1.4 (a))

Rear Position lamp light intensity significantly reduced 13/15 led not working (4.2.3 (a) (ii))

Rear Wheel spoke cracked (5.2.2 (d))

Stop lamp with a multiple light source more than 1/2 not functioning (4.3.1 (a) (ii))

Headlamp light intensity reduced (4.1.4 (a))

Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e))

Rear Footrest missing (6.2.12 (a))

Rear reflector missing (4.8.2 (a) (ii))

Chain guard missing

Rear Suspension arm pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Nearside Front Shock absorber has a light misting of oil on a wet day (5.3.2 (b))

Offside Front Shock absorber has a light misting of oil on a wet day (5.3.2 (b))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

gaiter fitted to rear shock unable to inspect

slight buckle front wheel

slight corrosion on frame

Front Position lamp not working (4.2.1 (a))

Headlamp not working on main beam (4.1.1 (a) (ii))

Horn not working (7.7 (a) (ii))

Nearside Rear Direction indicator obviously incorrectly positioned rear indicators inside rear tail light (4.4.3 (a))

Offside Rear Direction indicator obviously incorrectly positioned fitted inside rear tail light (4.4.3 (a))

Stop lamp light intensity significantly reduced both operations (4.3.3 (a) (ii))

Direction indicator flashing more than 120 times a minute (4.4.4 (a))

Nearside Front Shock absorber has a light misting of oil on a wet day (5.3.2 (b))

Offside Front Shock absorber has a light misting of oil on a wet day (5.3.2 (b))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

gaiter fitted to rear shock unable to inspect

slight buckle front wheel

slight corrosion on frame

Offside Front Shock absorber has a light misting of oil (5.3.2 (b))

chain guard missing

front brake and clutch lever shortened

front sprocket cover missing

Horn not working (7.7 (a) (ii))

Offside Front Shock absorber has a light misting of oil (5.3.2 (b))

chain guard missing

front brake and clutch lever shortened

front sprocket cover missing