2002 BMW 530

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Seat belt anchorage prescribed area is corroded but not considered excessive centre outer sill panel (7.1.1 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front bump stop adrift

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Seat belt anchorage prescribed area is corroded but not considered excessive centre outer sill panel starting to corrode (7.1.1 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Rear Tyre has a bulge, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Seat belt anchorage prescribed area is corroded but not considered excessive centre outer sill panel (7.1.1 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front bump stop adrift

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Seat belt anchorage prescribed area is corroded but not considered excessive centre outer sill panel starting to corrode (7.1.1 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material to rear (1.1.11 (c))

Oil leak, but not excessive (8.4.1 (a) (i))

engine cover fitted. under trays fitted.

Nearside Front Outer Tyre slightly damaged side wall. (5.2.3 (d) (ii))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material to rear. (1.1.11 (c))

Oil leak, but not excessive (8.4.1 (a) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

engine cover fitted. under trays fitted.

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear exhaust rubber mounting deteriorated

Oil leak ()

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

engine covers and under trays fitted

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Nail in tyre ()

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear exhaust rubber mounting deteriorated

Oil leak ()

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

engine covers and under trays fitted

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

engine covers fitted. under trays fitted.

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

slight oil leak. engine cover fitted.

Nearside Headlamp insecure (1.7.3)

Offside Headlamp insecure (1.7.3)

Offside Headlamp not working on dipped beam (1.7.5a)

rear exhaust mount deteriorated

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Front Suspension arm has slight play in a pin/bush (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Suspension arm has slight play in a pin/bush (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear coil spring corroded (2.4.C.1b)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Tyre tread depth below requirements of 1.6mm (4.1.E.1)