MOT Status
ExpiredMileage
134,744 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Fuel pipes corroded
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Nearside Rear Upper Suspension component mounting repair covered in underseal inner wheel arch (5.3.6 (a) (i))
Nearside rear parking brake has low effort
Offside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement front bush (5.3.4 (a) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Offside Front Wheel bearing has slight play (5.1.3 (a) (i))
Offside Front Wheel bearing slightly noisy (5.1.3 (b) (i))
Offside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive inner wheel arch (5.3.6 (a) (i))
Parking brake has just met the required effort, system may need adjustment or repair
Plastic sill covers fitted
Rear suspension components corroded
Sub-frame corroded but not seriously weakened Front and rear (5.3.3 (b) (i))
Suspension component mounting prescribed area is corroded but not considered excessive Both rear chassis (5.3.6 (a) (i))
Suspension component mounting prescribed area is corroded but not considered excessive Both rear inner sills (5.3.6 (a) (i))
Suspension component mounting prescribed area is corroded but not considered excessive Rear floors (5.3.6 (a) (i))
Nearside Front Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Nearside Front Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))
Fuel pipes corroded
Nearside Front Lower Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Rear Parking brake has low effort
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Nearside Rear Tyre obviously under inflated (5.2.3 (l))
Offside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Tyre obviously under inflated (5.2.3 (l))
Offside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive inner wheel arch (5.3.6 (a) (i))
Outer sill covers fitted
Parking brake has just met the required effort, system may need adjustment or repair
Rear Sub-frame corroded but not seriously weakened and front (5.3.3 (b) (i))
Rear sub frame bushes deteriorated
Rear suspension components corroded
Suspension component mounting prescribed area is corroded but not considered excessive Both rear chassis (5.3.6 (a) (i))
Suspension component mounting prescribed area is corroded but not considered excessive Both rear inner sills (5.3.6 (a) (i))
Suspension component mounting prescribed area is corroded but not considered excessive Rear floors (5.3.6 (a) (i))
Front sub frame corroded
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge worn on inner edge (5.2.3 (e))
Rear floors corroded
Rear fuel pipes corroded
Rear subframe corroded and repaired
Rear suspension components corroded
Suspension component mounting prescribed area is corroded but not considered excessive Both rear chassis by sub frame (5.3.6 (a) (i))
Suspension component mounting prescribed area is corroded but not considered excessive Both rear upper inner wheel arches (5.3.6 (a) (i))
Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
the whole car has corrosion underneath
Nearside Front Inner Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Offside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive Outer face of subframe has 2 holes due to corrosion but surrounding area of subframe still appears solid (5.3.6 (a) (i))
Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
the hole car has corrosion underneath
Suspension arm corroded but not seriously weakened off side and near side all of them (5.3.3 (b) (i))
Suspension component corroded but not seriously weakened subframe (5.3.3 (b) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Offside Rear Brake pad(s) wearing thin very low ??? (1.1.13 (a) (ii))
Suspension arm corroded but not seriously weakened off side and near side all of them (5.3.3 (b) (i))
Suspension component corroded but not seriously weakened subframe (5.3.3 (b) (i))
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive sill covers fitted (7.1.1 (a) (i))
Offside Seat belt anchorage prescribed area is corroded but not considered excessive sill covers fitted (7.1.1 (a) (i))
Nearside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive sill covers fitted (7.1.1 (a) (i))
Offside Seat belt anchorage prescribed area is corroded but not considered excessive sill covers fitted (7.1.1 (a) (i))
Central Exhaust has a minor leak of exhaust gases silencer (6.1.2 (a))
Front inner brake pads look low
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement both (2.4.G.2)
Rear brake disc worn, pitted or scored, but not seriously weakened both (3.5.1i)
corrosion has started to the underneath of the vehicle
fuel filler neck corroded
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Parking brake lever has little reserve travel (3.1.6b)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
under trays
Offside Rear rear parking brake recording little or no effort (3.7.B.6a)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Nearside Front Mechanical brake component has restricted free movement (3.5.1k)
Offside Rear rear parking brake recording little or no effort (3.7.B.6a)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Front Brake pad(s) wearing thin (3.5.1g)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Front brake disc excessively scored (3.5.1h)
Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Child seat fitted not allowing full inspection of adult belt
Nearside front tyre worn smooth on outside edge
Offside front tyre worn smooth on outside edge
How Reliable is the Lexus RX300?
Based on 229,652 MOT tests across 14,830 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
RX03 MOR is a 2004 Lexus RX300 in Grey with a 2,995cc petrol engine. This vehicle has been through 27 MOT tests with a personal pass rate of 70.4%.
Across all 2004 Lexus RX300 models, the average MOT pass rate is 79.7% with a typical mileage of 81,835 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Lexus RX300 fails its MOT is brake pad(s) less than 1.5 mm thick, accounting for 6,310 recorded failures. If you're considering buying RX03 MOR, it's worth having these areas checked by a mechanic before committing.
The Lexus RX300 typically stays on UK roads for around 26 years. At 22 years old, this Lexus RX300 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of RX03 MOR?
You can check the full history of RX03 MOR by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was RX03 MOR registered?
RX03 MOR is a 2004 Lexus RX300, first registered on 16 July 2004.
Is RX03 MOR safe to buy?
The MOT history for RX03 MOR shows 27 tests with a 70.4% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does RX03 MOR have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on RX03 MOR. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.