2006 Fiat Ducato

all underbody undersealed

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened Inner surface (1.1.14 (a) (ii))

Nearside Front Brake pipe clips or supports missing, pipe adequately supported (1.1.11 (d) (i))

Nearside Vehicle structure is repaired but structural rigidity is not significantly reduced Inner sill (6.1.1 (d) (i))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Vehicle structure is corroded but structural rigidity is not significantly reduced Inner sill (6.1.1 (c) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Vehicle undersealed

Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced INNER SILL 30CM FROM SEAT MOUNT (7.1.1 (a) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength INNER WING/WHEEL ARCH (5.3.6 (a) (i))

Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced INNER SILL 30CMS FROM SEAT MOUNT (7.1.1 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength INNER SILL (5.3.6 (a) (i))

nearside front door step holed and corroded (outwith prescibed areas

Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced REAR OF FRONT WHEEL ARCH (7.1.1 (a) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength INNER WHEEL ARCH AT FRONT STRUT AREA (5.3.6 (a) (i))

Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced REAR OF FRONT WHEEL ARCH (7.1.1 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength INNER WHEEL ARCH AT FRONT STRUT AREA (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength INNER WING/WHEEL ARCH (5.3.6 (a) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive Chassis and inner wing (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive Chassis and inner wing (5.3.6 (a) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor next to jacking point (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill holed, inner wheel arch patch missing (5.3.6 (a) (i))

Offside Front Brake prescribed area is excessively corroded Brake pipe mounting-inner wheel arch (1.1.21 (e) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is inadequately repaired inner to outer sill and inner wheel arch plate (5.3.6 (a) (i))

Offside Rear reflector missing (4.8.2 (a) (ii))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Body component slightly loose Rear number plate mounting trim (6.2.1 (a) (i))

Handbrake imbalanced

Nearside Front Direction indicator slightly discoloured (4.4.3 (a))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Offside Front Electrical wiring inadequately secured (4.11 (a) (i))

Offside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Parking (secondary brake) grabbing slightly (1.3.1 (c))

battery tray corroded

Parking (secondary brake) grabbing slightly (1.3.1 (c))

Front Brakes imbalanced across an axle (1.2.1 (b) (i))

Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wing (5.3.6 (a) (i))

Nearside Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wing (5.3.6 (a) (i))

Offside Rear Direction indicator not working (4.4.1 (a) (ii))

Outline marker lamp adversely affected by the operation of another lamp All offside side marker lamps flashing with indicator (4.2.3 (c))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Front Service brake fluctuating, but not excessively (1.2.1 (e))

Nearside Front Electrical wiring insecure Brake wear indicator (4.11 (a) (i))

Offside Rear Electrical wiring insecure Wiring fouling suspension pipe (4.11 (a) (i))

Parking (secondary brake) grabbing slightly (1.3.1 (c))

Wipers smearing screen

Nearside Rear Mechanical brake component has restricted free movement (3.5.1k)

Offside Rear Mechanical brake component has restricted free movement (3.5.1k)

Parking brake lever has no reserve travel (3.1.6b)

Nearside Rear position lamp(s) not working (1.1.A.3b)

Offside Stop lamp not working (1.2.1b)

Offside rear brake binding (3.7.B.1)

Service brake: efficiency below requirements (3.7.B.7)

Nearside outer sill panel badly corroded not structural marked with chalk

Offside outer sill panel badly corroded not structural marked with chalk

Rear box section corroded excessively but not structural marked with chalk

Rear rear brake application uneven (3.7.B.2)

nearside front pad warning wire cut

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b) DANGEROUS

nearside front pad warning wire cut

Exhaust system not adequately supported (7.1.1)

Parking brake lever has no reserve travel (3.1.6b)