2011 Infiniti Ex

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

exhaust corroded

slight fluid leak from P A S rack

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Offside Power steering ram has slight seepage from a joint (2.1.5 (a))

Rear Suspension arm corroded but not seriously weakened both sides (5.3.3 (b) (i))

Rear Tyre slightly damaged/cracking or perishing both sides (5.2.3 (d) (ii))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

all rear underside components corroded

front cross support brace corroded

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Offside Power steering ram has slight seepage from a joint (2.1.5 (a))

Rear Suspension arm corroded but not seriously weakened both sides (5.3.3 (b) (i))

Rear Tyre slightly damaged/cracking or perishing both sides (5.2.3 (d) (ii))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

all rear underside components corroded

front cross support brace corroded

Exhaust system corroded

Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Exhaust system has corrosion in places

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

engine covers and undertrays fitted

exhaust system has some corrosion

Engine cover fitted / Under vehicle cover fitted (engine/gearbox)

Exhaust system a little corroded in places

Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Smoke test carried out, no reading detected by smoke meter 0.00, therefore plate reading 1.50m-1 reached

Engine cover fitted / Under vehicle cover fitted (engine/gearbox)

Exhaust system a little corroded in places

Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Smoke test carried out, no reading detected by smoke meter 0.00, therefore plate reading 1.50m-1 reached

Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)

Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)

engine covers and undertrays fitted

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)

Nearside Rear Tyre worn close to the legal limit 3mm side wall been rubbed (4.1.E.1)

Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

engine covers and undertrays fitted

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Offside Front tyre cut to outer sidewall

engine covers and under trays fitted

Engine cover fitted to vehicle

Nearside Front Outer tyre wall has slight damage

Offside Front Outer tyre wall has slight damage

Slight oil dampness around bottom engine/gearebox

Under tray fitted to vehicle

Engine covers fitted obscuring some components in the engine bay

Front pads starting to get low (80%) worn

Slight damage to offisde front tyre outer wall

Slight oil dampness around gearbox area

Under-trays fitted obscuring some underside components