2001 Porsche 911

Brake disc worn, pitted or scored, but not seriously weakened all four discs . (1.1.14 (a) (ii))

Central Rear Stop lamp(s) with a multiple light source up to 1/2 not functioning (4.3.1 (a) (i))

Nearside Rear Shock absorbers has a reduced damping effect (5.3.2 (d))

Offside Rear Obligatory mirror slightly damaged (3.3 (b) (i))

Rear Tyre slightly damaged/cracking or perishing perish cracks in the side walls . (5.2.3 (d) (ii))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Brake performance unable to be tested system leaking . (1.2.1 (g))

Front Brake pipe excessively corroded both sides . (1.1.11 (c))

Front Direction indicator not working both sides . (4.4.1 (a) (ii))

Front Headlamp lens seriously defective both sides . (4.1.1 (b) (ii))

Rear Brake pipe excessively corroded both sides (front to rear) . (1.1.11 (c))

Windscreen washer not working (3.5 (a))

Offside Front Brake pipe leaking on a hydraulic braking system (1.1.11 (b) (ii)) DANGEROUS

Rear Tyre slightly damaged/cracking or perishing perish cracks (in side walls) (5.2.3 (d) (ii))

Central Stop lamp(s) with a multiple light source up to 1/2 not functioning (4.3.1 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

washers are weak

Wiper blades slightly smeary but still clear the screen

Fuel cap seal splitting

Nearside Front Front suspension has slight deterioration of the bonding between metal and flexible material of an upper support bearing (2.5.B.3a)

Nearside Rear Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Front suspension has slight deterioration of the bonding between metal and flexible material of an upper support bearing (2.5.B.3a)

Offside Rear Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Headlamp not working on main beam (1.7.5a)

Main beam 'tell-tale' not working (1.7.4c)

Offside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Hydraulic brake cylinder locking device insecure caliper bolt unwound (3.6.A.2d) DANGEROUS

Rear Direction indicator slightly discoloured both (1.4.A.2f)

Rear brake disc worn, pitted or scored, but not seriously weakened both (3.5.1i)

full under trays fitted

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Engine covers fitted obscuring some components in the engine bay

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Under-trays fitted obscuring some underside components

Offside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Engine covers fitted obscuring some components in the engine bay

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Under-trays fitted obscuring some underside components

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components

Engine covers fitted obscuring some components in the engine bay

Nearside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Under-trays fitted obscuring some underside components

Unable to see testable items due to plastic covers

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Unable to see testable items due to plastic covers