2007 Jinlun Jl

Drive chain worn to excess (6.2.1e)

Exhaust excessively deteriorated (7.1.1a)

Front Hydraulic brake control feels spongy (3.1.4a)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Locking devices not correctly fitted which may make the motor bicycle dangerous to ride torque arm split pin missing (6.2.1h)

Locking devices not correctly fitted which may make the motor bicycle dangerous to ride torque arm split pin missing (6.2.1h)

Rear Drive chain sprocket worn to excess (6.2.1e)

Rear reflector on motorcycle missing (1.4.1)

Rear suspension bush has excessive free play swing arm (2.4.A2a(i))

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Drive chain excessively loose (6.2.1d) DANGEROUS

Locking devices not correctly fitted which may make the motor bicycle dangerous to ride Rear brake cable to pedal securing device missing (6.2.1h) DANGEROUS

Exhaust is leaking but is not excessively noisey (7.1.1b)

Front Tyre valve stem slightly damaged (4.1.2c)

suspect front tyre incorrect fitment

Exhaust noisy (7.1.2)

Front Drive chain sprocket slightly worn (6.2.1e)

Front shock absorber has light misting of stanchion (2.3.3)

Front suspension has a slightly reduced damping effect (2.3.6c)

Rear Direction indicator slightly discoloured (1.5.1b)

Rear Drive chain worn but not considered excessive (6.2.1e)

Steering movement slightly 'notchy' (2.2.1a)

Tyre valve stem slightly damaged both (4.1.2c)

suspect front tyre unsuitable

Rear Tyre worn close to the legal limit (4.1.3(ii))

Floor brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.C1b)

Front Floor brake test indicates a sticking brake (3.3.C2c) DANGEROUS

Front wheel bearings have excessive free play (2.3.5b) DANGEROUS

Rear Brake pad(s) contaminated by oil or grease (3.2.A1k) DANGEROUS