2008 Chevrolet Matiz

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Horn sound not in accordance with requirements Working but barely audible (7.7 (c))

Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Rear Upper Shock absorbers has an excessively worn bush (5.3.2 (c))

Nearside Front Upper Macpherson strut pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Child Seat fitted not allowing full inspection of adult belt ()

Oil leak, but not excessive (8.4.1 (a) (i))

Brake lever has insufficient reserve travel (1.1.2 (a))

Brake operation has insufficient reserve pressure/vacuum to provide assistance for at least four more brake applications after the warning device has operated (or gauge shows an unsafe reading) (1.1.3 (a) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Front Child Seat fitted not allowing full inspection of adult belt ()

Oil leak, but not excessive (8.4.1 (a) (i))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Engine oil sump pan slight corrosion

Handbrake lever long travel

Oil leak, but not excessive (8.4.1 (a) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Offside Front Headlamp not working on main beam (4.1.1 (a) (ii))

Engine oil sump pan slight corrosion

Handbrake lever long travel

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Front Exhaust has a major leak of exhaust gases Flexi pipe (6.1.2 (a))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Offside Front Headlamp not working on main beam (4.1.1 (a) (ii))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Front Brake pad(s) less than 1.5 mm thick Both sides inner pad (1.1.13 (a) (ii)) DANGEROUS

Offside Rear Service brake has no recorded effort at a wheel (1.2.1 (a) (ii)) DANGEROUS

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Both sides tyres starting to perish

Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Rear Both sides tyres starting to perish

Nearside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Front Brake pad(s) wearing thin Both sides (3.5.1g)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pad(s) wearing thin (3.5.1g)