2009 Yamaha Yzf

Drive chain slightly loose (6.1.7 (c) (i))

Exhaust noisy (8.1.1 (a))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Rear Suspension arm pin, bush or joint worn but not resulting in excessive movement Suspension linkage (5.3.4 (a) (i))

Solo seat fitted at time of test, no pillion footrests

Nearside Rear Footrest missing (6.2.12 (a))

Offside Rear Footrest missing (6.2.12 (a))

Rear reflector missing (4.8.2 (a) (ii))

Drive chain slightly loose (6.1.7 (c) (i))

Exhaust noisy (8.1.1 (a))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Rear Suspension arm pin, bush or joint worn but not resulting in excessive movement Suspension linkage (5.3.4 (a) (i))

Clutch lever pivot worn

Exhaust noisy (8.1.1 (a))

Rear Brake fluid below minimum mark (1.1.10 (d) (i))

Rear Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Rear Suspension arm pin, bush or joint worn but not resulting in excessive movement Suspension linkage (5.3.4 (a) (i))

Rear reflector obviously incorrectly positioned (4.8.2 (a) (i))

Registration plate deteriorated but not likely to be misread (0.1 (b))

Solo seat fitted at time of test, no pillion footrests

Headlamp aim too high (4.1.2 (a))

Clutch lever pivot worn

Exhaust noisy (8.1.1 (a))

Rear Brake fluid below minimum mark (1.1.10 (d) (i))

Rear Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Rear Suspension arm pin, bush or joint worn but not resulting in excessive movement Suspension linkage (5.3.4 (a) (i))

Rear reflector obviously incorrectly positioned (4.8.2 (a) (i))

Registration plate deteriorated but not likely to be misread (0.1 (b))

Solo seat fitted at time of test, no pillion footrests

All direction indicators flashing more than 120 times a minute (4.4.4 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Brake pad(s) close to minimum limit inside pad on limit (1.1.13 (a))

Rear Tyre worn close to the legal limit on legal limit (5.2.3 (e))

Steering headbearing has slight free play (2.2.2 (f) (i))

Nearside Front Footrest insecure foot peg and gear selector securing bolt insecure (6.2.12 (a))

Offside Front Wheel spindle locking device missing fork pinch bolt missing (5.2.1 (d))

Rear Exhaust system insecure exhaust clamp missing (6.1.2 (a))

Front Brake master cylinder leaking (1.1.10 (b) (ii)) DANGEROUS

All direction indicators flashing more than 120 times a minute (4.4.4 (a))

Drive chain slightly loose (6.1.7 (c) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Brake pad(s) close to minimum limit inside pad on limit (1.1.13 (a))

Rear Tyre worn close to the legal limit on legal limit (5.2.3 (e))

Steering headbearing has slight free play (2.2.2 (f) (i))

Drive chain slightly loose (6.1.7 (c) (i))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Exhaust noisy (8.1.1 (a))

Suspension damaged but not seriously weakened swingarm (5.3.3 (b) (i))

Front Stop lamp not working (4.3.1 (a) (ii))

Steering headbearing has excessive wear or free play (2.2.2 (f) (i))

Front Valve stem seriously damaged (5.2.3 (j)) DANGEROUS

Drive chain slightly loose (6.1.7 (c) (i))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Exhaust noisy (8.1.1 (a))

Suspension damaged but not seriously weakened swingarm (5.3.3 (b) (i))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Front fork operation soft

Rear Tyre worn close to the legal limit (5.2.3 (e))

Steering headbearing has slight free play (2.2.2 (f) (i))

Wheel alignment slightly misaligned (2.4 (a))

Drive chain excessively loose (6.1.7 (c) (i))

Rear reflector likely to become detached (4.8.1 (b) (ii))

Registration plate lamp does not illuminate simultaneously with the position lamp(s) (4.7.2 (a))

Steering operation fouling on the fuel tank or bodywork on full lock missing lock stops both sides (2.1.4 (b))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Front fork operation soft

Rear Tyre worn close to the legal limit (5.2.3 (e))

Steering headbearing has slight free play (2.2.2 (f) (i))

Rear Brake pad(s) less than 1.0 mm thick (1.1.13 (a))

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

odometer clock insecure

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

odometer clock insecure

Offside Headlamp aim too high (1.6)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)