MOT Status
ExpiredMileage
158,014 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Offside Front Outer Body has slight corrosion sill corroded (6.1.B.2)
Offside Front Outer Drive shaft which forms part of the suspension coupling gaiter damaged, but preventing the ingress of dirt (2.4.G.4e)
Offside Front Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Inner Body has slight corrosion sill corroded (6.1.B.2)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Nearside Front Lower Front suspension ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Nearside Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Vehicle structure has slight corrosion suspension arm (6.1.B.2)
Nearside Vehicle structure has slight corrosion inner sill (6.1.B.2)
Offside Front Lower Front suspension ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Brake pad(s) wearing thin (3.5.1g)
Offside Rear Inner Vehicle structure has slight corrosion sill (6.1.B.2)
Offside Rear Vehicle structure has slight corrosion suspension arm (6.1.B.2)
Vehicle structure has slight corrosion front (6.1.B.2)
Vehicle structure has slight corrosion rear (6.1.B.2)
Vehicle structure has slight corrosion rear cross member (6.1.B.2)
engine covers fitted
EXHAUST SYSTEM IS CORRODED
NEAR SIDE REAR TYRE INNER SIDE WALL IS DAMAGED CUT NO PLY OR CORD EXPOSED AT TIME OF MOT
Nearside Outer Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Outer Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Outer Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Outer Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
SIGHNS OF NEAR SIDE FRONT BRAKE GETTING HOT NOT BINDING AT TIME OF MOT
Offside Registration plate lamp not working (1.1.C.1d)
front brake application uneven (3.7.B.2)
front brakes release unevenly (3.7.B.4)
EXHAUST SYSTEM IS CORRODED
NEAR SIDE REAR TYRE INNER SIDE WALL IS DAMAGED CUT NO PLY OR CORD EXPOSED AT TIME OF MOT
Nearside Outer Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Outer Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Outer Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Outer Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
SIGHNS OF NEAR SIDE FRONT BRAKE GETTING HOT NOT BINDING AT TIME OF MOT
Nearside Front Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Nearside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Front Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
exhaust is in a poor condition
Nearside Front brake disc in such a condition that it is seriously weakened (3.5.1i)
Offside Front position lamp(s) not working (1.1.A.3b)
Registration plate lamp not working (1.1.C.1d)
Nearside Brake pad(s) less than 1.5 mm thick (3.5.1g) DANGEROUS
Nearside Front Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Front Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
exhaust is in a poor condition
Brakes imbalanced across an axle (3.7.B.5b)
Nearside Headlamp aim too low (1.8)
Registration plate lamp not working (1.1.C.1d)
Nearside Front position lamp(s) not working (1.1.A.3b)
Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Suspension joint nearside lower dust cover split/missing
Suspension joint offside lower dust cover split/missing
Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Suspension joint nearside lower dust cover split/missing
Suspension joint offside lower dust cover split/missing
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Nearside Rear Suspension arm locating pin locking device not properly locked (2.4.G.3b)
Brakes imbalanced across an axle (3.7.B.5b)
Offside Front brake disc excessively pitted (3.5.1h)
front brake application uneven (3.7.B.2)
Offside Rear Brake pad(s) wearing thin (3.5.1g)
How Reliable is the Mazda 6?
Based on 1,904,140 MOT tests across 159,651 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
RY02 JOA is a 2002 Mazda 6 in Silver with a 1,999cc petrol engine. This vehicle has been through 18 MOT tests with a personal pass rate of 66.7%.
Across all 2002 Mazda 6 models, the average MOT pass rate is 71.4% with a typical mileage of 78,488 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 6 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 45,082 recorded failures. If you're considering buying RY02 JOA, it's worth having these areas checked by a mechanic before committing.
The Mazda 6 typically stays on UK roads for around 24 years. At 24 years old, this Mazda 6 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of RY02 JOA?
You can check the full history of RY02 JOA by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was RY02 JOA registered?
RY02 JOA is a 2002 Mazda 6, first registered on 25 July 2002.
Is RY02 JOA safe to buy?
The MOT history for RY02 JOA shows 18 tests with a 66.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does RY02 JOA have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on RY02 JOA. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.