2002 Mercedes-benz Vito

Nearside Front Inner Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Front Outer Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Inner Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Front Outer Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Rear Inner Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Outer Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Nearside Front Seat belt anchorage prescribed area is excessively corroded inner sill (5.2.6)

Nearside Front Seat belt anchorage prescribed area is excessively corroded outer sill (5.2.6)

Nearside Front Subframe mounting prescribed area is excessively corroded chassis (2.4.A.3)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)

Offside Front Seat belt anchorage prescribed area is excessively corroded inner sill (5.2.6)

Offside Front Seat belt anchorage prescribed area is excessively corroded outer sill (5.2.6)

Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)

Windscreen washer provides insufficient washer liquid (8.2.3)

Rear parking brake recording low effort 16%

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Front wheel bearing has excessive play (2.5.A.3c)

Nearside Headlamp not working on main beam (1.7.5a)

Offside Headlamp not working on dipped beam (1.7.5a)

Rear parking brake recording low effort 16%

Offside Front Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Horn not working (1.6.2a)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Offside Front All position lamps not working (1.1.A.3b)

Offside Front Front constant velocity joint is insecure (2.5.C.1b)

Offside Front Headlamp not working on dipped beam (1.7.5a)

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Front Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Rear Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Exhaust has a major leak of exhaust gases (7.1.2)

Horn not working (1.6.2a)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Side repeater incorrect colour (1.4.A.2f)

all prescribed areas and chassis beginning to corrode

exhaust corroding

o/s/f inner cv gaiter split

vehicle body in poor condition

Front Exhaust system not adequately supported (7.1.1)

Horn not working (1.6.2a)

Nearside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Obligatory mirror seriously damaged, affecting the rear view (8.1.2a)

Offside front brake binding (3.7.B.1)

front brake application uneven (3.7.B.2)

both outer sill panels slightly corroding

n/s/f brake hose pipe slightly splitting up

n/s/r tyre slightly wearing at inner edge

small crack on windscreen

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Side repeater slightly discoloured (1.4.A.2f)

Offside Side repeater slightly discoloured (1.4.A.2f)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

both rear suspension arms corroded

Brakes imbalanced across an axle (3.7.B.5b)

Centre Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Headlamp aim too low (1.8)

Nearside Rear brake disc excessively pitted (3.5.1h)

Nearside Stop lamp not working (1.2.1b)

Nearside front brake binding (3.7.B.1)

Offside Headlamp aim too low (1.8)

Offside Rear brake disc excessively pitted (3.5.1h)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Side repeater slightly discoloured (1.4.A.2f)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Side repeater slightly discoloured (1.4.A.2f)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

both rear suspension arms corroded

Parking brake: efficiency below requirements (3.7.B.7)

Front front brake juddering slightly (3.7.A.2b)

Horn not working (1.6.2a)

n/s inner cv boot insecure

Brake hydraulic reservoir fluid level below minimum level (3.6.G.1b)

Exhaust has a major leak of exhaust gases (7.1.2)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Horn not working (1.6.2a)

Nearside Headlamp aim too low when the centre of the headlamp is below 850mm from the ground (1.6.B2)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Rear fog lamp not working (1.3.2b)

Rear Registration plate lamp not working (1.1.C.1d)