MOT Status
ValidMileage
136,973 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
slight engine oil leak
Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced n/s/r towing eye area (6.1.1 (c) (i))
Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced o/s/f jacking point (6.1.1 (c) (i))
Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i))
Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i))
Nearside Side repeater incorrect colour (4.4.3 (a))
Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
underside of vehicle surface corrosion
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength jacking point (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength jacking point (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Offside Rear fog lamp does not emit a steady red light (4.5.4 (a))
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced centre floor (7.1.1 (a) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
o/s + n/s inner sills filler used
o/s+n/s outer sills filler used
Seat belt anchorage prescribed area is corroded but not considered excessive inner and outer sills front to rear (7.1.1 (a) (i))
osf and nsf jacking points
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))
Offside Rear Position lamp not working (4.2.1 (a) (ii))
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Seat belt anchorage prescribed area is corroded but not considered excessive inner and outer sills front to rear (7.1.1 (a) (i))
osf and nsf jacking points
Brake load sensing valve stiff (1.1.17 (c) (ii))
both outer sills weak
Emissions not tested (8.2.2.2 (e))
Exhaust has a major leak of exhaust gases (6.1.2 (a))
Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Rear Brake pipe excessively corroded (1.1.11 (c))
Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Rear Brake pipe excessively corroded (1.1.11 (c))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Rear Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Brake load sensing valve stiff (1.1.17 (c) (ii))
both outer sills weak
Nearside Front Tyre worn close to legal limit/worn on edge and nail in tyre (5.2.3 (e))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Offside Inner sill corroded but not with in prescribed area
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear valance corroded but not with in prescribed area
corroded underneath
Nearside Rear Position lamp not working (4.2.1 (a) (ii))
Offside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge and nail in tyre (5.2.3 (e))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Offside Inner sill corroded but not with in prescribed area
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear valance corroded but not with in prescribed area
corroded underneath
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Position lamp not working (4.2.1 (a) (ii))
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Service brake efficiency below requirements (1.2.2 (a) (i))
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
offside steering rack gaiter twisted
underside general corrosion
corrosion to underneath
Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))
Nearside Side repeater incorrect colour (4.4.3 (a))
Offside Side repeater incorrect colour (4.4.3 (a))
Parking brake efficiency below requirements (1.4.2 (a) (i))
corrosion to underneath
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Front Lower Body has slight corrosion (6.1.B.2)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Front Inner tyre edge worn
oil leak
Nearside Front Upper Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Outer Front constant velocity joint is insecure (2.5.C.1b)
Nearside Front Inner tyre edge worn
Offside Front Inner tyre edge worn
oil leak
Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS
Offside Rear Brake pad(s) wearing thin (3.5.1g)
Oil leak
n/s/f brake hose slightly twisted
rear brake discs showing corrosion
Nearside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Inner Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Inner Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Nearside Inner Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Inner Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Front Brake pad(s) wearing thin (3.5.1g)
Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Stop lamp not working (1.2.1b)
Nearside Rear Stop lamp not working (1.2.1b)
Offside Rear Stop lamp not working (1.2.1b)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
How Reliable is the Mercedes-benz Vito?
Based on 2,011,702 MOT tests across 164,434 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
RY03 DDK is a 2003 Mercedes-benz Vito in Blue with a 2,151cc diesel engine. This vehicle has been through 32 MOT tests with a personal pass rate of 59.4%.
Across all 2003 Mercedes-benz Vito models, the average MOT pass rate is 66.0% with a typical mileage of 105,209 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mercedes-benz Vito fails its MOT is parking brake: efficiency below requirements, accounting for 49,564 recorded failures. If you're considering buying RY03 DDK, it's worth having these areas checked by a mechanic before committing.
The Mercedes-benz Vito typically stays on UK roads for around 29 years. At 23 years old, this Mercedes-benz Vito is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of RY03 DDK?
You can check the full history of RY03 DDK by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was RY03 DDK registered?
RY03 DDK is a 2003 Mercedes-benz Vito, first registered on 8 May 2003.
Is RY03 DDK safe to buy?
The MOT history for RY03 DDK shows 32 tests with a 59.4% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does RY03 DDK have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on RY03 DDK. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.