2003 Mercedes-benz Vito

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Integral body structure is corroded but structural rigidity is not significantly reduced A96478 (6.1.1 (c) (i))

Offside Integral body structure is corroded but structural rigidity is not significantly reduced inner and outer sills (6.1.1 (c) (i))

Offside Obligatory mirror slightly damaged (3.3 (b) (i))

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Offside Obligatory mirror slightly damaged (3.3 (b) (i))

Central Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Side repeater incorrect colour (1.4.A.2f)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front position lamp(s) not working (1.1.A.3b)

Parking brake lever has no reserve travel (3.1.6b)

Rear Registration plate lamp not working both lamps (1.1.C.1d)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Rear hand brake low on effort 19%

Rear service brake low on effort 56%

Electronic stability system warning lamp indicates a fault (3.4.1c)

Nearside Front Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Parking brake lever has little reserve travel (3.1.6b)

exhaust heat shield insecure

Centre Exhaust has a major leak of exhaust gases (7.1.2)

Front passenger door cannot be opened from inside the vehicle (6.2.B.1b)

Front passenger door cannot be opened from outside the vehicle (6.2.B.1b)

Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Parking brake lever has little reserve travel (3.1.6b)

exhaust heat shield insecure

Nearside Inner Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Offside Inner Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Offside Inner Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Parking brake lever has little reserve travel (3.1.6b)

nearside front tyre fouling inner arch liner on lock

Nearside Inner Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Rear Brake hose has insufficient room to move, resulting in fouling on any part (3.6.B.4a)

Nearside Inner Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Offside Inner Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Offside Inner Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Parking brake lever has little reserve travel (3.1.6b)

nearside front tyre fouling inner arch liner on lock

centre of exhuast weak

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside Stop lamp not working (1.2.1b)

Offside Stop lamp not working (1.2.1b)

both rear brake discs corroded

both rear brake discs corroded

rear brake discs getting poor

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

front brake juddering severely (3.7.A.2b)

Nearside Front Tyre worn close to the legal limit (4.1.E.2b)

Offside Front Tyre worn close to the legal limit (4.1.E.2b)