2004 Toyota Land Cruiser

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Fuel Pipe/s corroded

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Rear Rear reflector defective or damaged by up to 50% of the reflecting surface (4.8.1 (a) (i))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Driver's view to the front outside the swept area of the windscreen wipers restricted by an obstruction (3.1 (a) (i))

Fuel Pipe/s corroded ()

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Power steering pipe/hose has slight seepage (2.1.5 (a))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Suspension component corroded but not seriously weakened (5.3.3 (b) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security All body mountings (6.2.2 (d) (i))

Nearside Front Brake pipe corroded, covered in grease or other material Pipe feeding flexible brake hose corroding (1.1.11 (c))

Nearside Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Front Brake pipe corroded, covered in grease or other material Pipe feeding flexible brake hose corroding (1.1.11 (c))

Offside Front Lower Suspension arm corroded but not seriously weakened Wishbone (5.3.3 (b) (i))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced Chassis and cross-members (6.1.1 (c) (i))

Vehicle structure slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))

Electronic stability control warning lamp indicates a fault (7.12 (e))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Offside Headlamp levelling device inoperative (4.1.5 (a))

Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis rail towards the front of the nearside rear wheel - Marked with yellow chalk (6.1.1 (c) (i))

Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security All body mountings (6.2.2 (d) (i))

Nearside Front Brake pipe corroded, covered in grease or other material Pipe feeding flexible brake hose corroding (1.1.11 (c))

Nearside Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Front Brake pipe corroded, covered in grease or other material Pipe feeding flexible brake hose corroding (1.1.11 (c))

Offside Front Lower Suspension arm corroded but not seriously weakened Wishbone (5.3.3 (b) (i))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced Chassis and cross-members (6.1.1 (c) (i))

Vehicle structure slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))

Brake pipe corroded, covered in grease or other material Both front brake pipes feeding flexible brake hoses corroded (1.1.11 (c))

Integral body structure is corroded but structural rigidity is not significantly reduced Front and rear cross-members (6.1.1 (c) (i))

Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security All body mounting prescribed areas (6.2.2 (d) (i))

Offside Front Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced Chassis (6.1.1 (c) (i))

Nearside Front Brake pipe corroded, covered in grease or other material pipe into flexible hose (1.1.11 (c))

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Front Brake pipe corroded, covered in grease or other material pipe into flexible hose (1.1.11 (c))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Rear row of seats folded flat at time of test

corrosion around offside rear body mounting

underside of vehicle generally corroded and dirty

Electronic stability control warning lamp indicates a fault (7.12 (e))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Front Brake pipe corroded, covered in grease or other material pipe into flexible hose (1.1.11 (c))

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Front Brake pipe corroded, covered in grease or other material pipe into flexible hose (1.1.11 (c))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Rear row of seats folded flat at time of test

corrosion around offside rear body mounting

underside of vehicle generally corroded and dirty

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Nearside Front Service brake excessively binding (1.2.1 (f))

Offside Front Lower Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

CORROSION AROUND OFFSIDE REAR BODY MOUNTING

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Brake pipe corroded, covered in grease or other material PIPE INTO FLEXIBLE HOSE (1.1.11 (c))

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Oil leak, but not excessive (8.4.1 (a) (i))

REAR ROW OF SEATS NOT FITTED AT TIME OF TEST.

UNDERSIDE OF VEHICLE DIRTY AND MUDDY

UNDERSIDE OF VEHICLE GENERALLY BECOMING CORRODED

Brake disc worn, pitted or scored, but not seriously weakened Both front discs scorn (1.1.14 (a) (ii))

Integral body structure is corroded but structural rigidity is not significantly reduced Chassis (6.1.1 (c) (i))

Nearside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security Body mounting corroding (6.2.2 (d) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Electronic stability control warning lamp indicates a fault (7.12 (e))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Rear of the chassis behind bumper corroded - Marked with white chalk (6.2.2 (d) (i))

Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Centre section of chassis around and within suspension mounting - Marked with white chalk (5.3.6 (a) (i))

Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Body mounting corroded / partially missing - Marked with white chalk (6.2.2 (d) (i))

Brake disc worn, pitted or scored, but not seriously weakened Both front discs scorn (1.1.14 (a) (ii))

Headlamp lens slightly defective Both lenses deteriorating (4.1.1 (b) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced Chassis (6.1.1 (c) (i))

Nearside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security Body mounting corroding (6.2.2 (d) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Play in steering rack inner joint(s) ()

Nearside Rear Service brake grabbing slightly (1.2.1 (c))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

e.m.l. ( engine management light ) on

Rear Brake pad(s) wearing thin (3.5.1g)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Offside Inner Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Windscreen has damage to the swept area in excess of a 40mm circle outside zone 'A' (8.3.1d)

Nearside Front Tyre has ply or cords exposed (4.1.D.1b) DANGEROUS

Offside Front Tyre has ply or cords exposed (4.1.D.1b) DANGEROUS

Rear Brake pad(s) wearing thin (3.5.1g)

EML on

Front Brake pad(s) wearing thin (3.5.1g)

Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Headlamp aim too low (1.8)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

EML on

Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Registration plate lamp not working (1.1.C.1d)

Front Brake pad(s) wearing thin (3.5.1g)

both front tyres wearing on edges

rear wiper blade in poor condition

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

both front tyres wearing on edges

rear wiper blade in poor condition

o/s/r tyre wearing on inner edge

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

o/s/r tyre wearing on inner edge

Offside Registration plate lamp not working (1.1.C.1d)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear Brake pad(s) wearing thin (3.5.1g)

Coolant leak

Registration plate lamp not working (1.1.C.1d)

Coolant leak

chip in screen †wipers starting to split on ends