MOT Status
ValidMileage
79,003 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
Nearside Front Lower Suspension arm ball joint has slight play front (5.3.4 (a) (i))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement front (5.3.4 (a) (i))
Nearside Front Macpherson strut mounting damaged but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Exhaust mounting defective (6.1.2 (a))
Nearside Rear Road wheel slightly distorted (5.2.2 (c) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Rear Brake pipe corroded, covered in grease or other material nearside and offside (1.1.11 (c))
Rear Suspension component mounting prescribed area is corroded but not considered excessive nearside and offside (5.3.6 (a) (i))
Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))
Nearside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Front Road wheel fixing missing (5.2.1 (a) (i))
Nearside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))
Offside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))
Offside Front Lower Suspension arm pin or bush excessively worn front (5.3.4 (a) (i))
Offside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))
Offside Stop lamp(s) not working (4.3.1 (a) (ii))
Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
Nearside Front Lower Suspension arm ball joint has slight play front (5.3.4 (a) (i))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement front (5.3.4 (a) (i))
Nearside Front Macpherson strut mounting damaged but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Exhaust mounting defective (6.1.2 (a))
Nearside Rear Road wheel slightly distorted (5.2.2 (c) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Rear Brake pipe corroded, covered in grease or other material nearside and offside (1.1.11 (c))
Rear Suspension component mounting prescribed area is corroded but not considered excessive nearside and offside (5.3.6 (a) (i))
Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))
Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
Nearside Front Macpherson strut mounting damaged but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Exhaust mounting defective (6.1.2 (a))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))
Nearside Front Lower Suspension arm ball joint excessively worn Rear (5.3.4 (a) (i))
Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
Nearside Front Macpherson strut mounting damaged but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Exhaust mounting defective (6.1.2 (a))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))
Central Stop light disconnected
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Rear Exhaust mounting defective (6.1.2 (a))
Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Windscreen washer provides insufficient washer liquid (3.5 (a))
Central Stop light disconnected
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Rear Exhaust mounting defective (6.1.2 (a))
Central Brake light disconnected
Offside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Rear Exhaust mounting defective (6.1.2 (a))
Central Stop lamp(s) not working (4.3.1 (a) (ii))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Rear Exhaust mounting defective (6.1.2 (a))
Central Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))
undertrays and engine covers fitted unable to check certain items
Anti-lock braking system warning lamp does not illuminate (1.6 (a))
Electronic stability control switch not functioning correctly (7.12 (d))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Offside Front Coil spring fractured or broken (5.3.1 (b) (i))
Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Rear Tyre not fitted in accordance with side wall instructions (5.2.3 (i))
Central Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))
Offside Rear Tyre worn close to legal limit/worn on edge 245 / 35 / 18 (5.2.3 (e))
undertrays and engine covers fitted unable to check certain items
Front Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear (5.3.4 (a) (i))
Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))
Central Rear Stop lamp(s) light intensity significantly reduced (4.3.3 (a) (ii))
Front Brakes imbalanced across an axle (1.2.1 (b) (i))
Nearside Front Position lamp not working (4.2.1 (a))
Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Nearside Rear Tyre(s) of different sizes are fitted on the same axle. (5.2.3 (b))
Offside Front Lower Suspension arm ball joint excessively worn rear (5.3.4 (a) (i))
Front Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear (5.3.4 (a) (i))
Nearside Front Front suspension has excessive play in a lower suspension ball joint rear of front suspension (2.5.B.1a)
Nearside Front Tyre(s) incorrect because different size tyres are fitted on the same axle. space saver fitted incorrect tyre size (4.1.A.1a)
Front brake disc worn, pitted or scored, but not seriously weakened both (3.5.1i)
Nearside Front Front wheel bearing has slight play (2.5.A.3c)
Nearside Front tyre side wall damange
Offside Front Front wheel bearing has slight play (2.5.A.3c)
Front brake disc worn, pitted or scored, but not seriously weakened both (3.5.1i)
Nearside Front Front wheel bearing has slight play (2.5.A.3c)
Nearside Front tyre side wall damange
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Front wheel bearing has slight play (2.5.A.3c)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Rear Brake pad(s) wearing thin (3.5.1g)
Engine covers fitted obscuring some components in the engine bay
Rear Brake pad(s) wearing thin (3.5.1g)
Under-trays fitted obscuring some underside components
Both rear tyre tread getting low
Child seat fitted not allowing full inspection of adult belt
Engine covers fitted obscuring some components in the engine bay
Under-trays fitted obscuring some underside components
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
o/s/f tyre getting low
Centre Stop lamp obscured but not more than 50% (1.2.1c)
How Reliable is the Mercedes-benz C?
Based on 8,031,355 MOT tests across 683,668 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
RY08 EHV is a 2008 Mercedes-benz C in Black with a 1,796cc petrol engine. This vehicle has been through 23 MOT tests with a personal pass rate of 60.9%.
Across all 2008 Mercedes-benz C models, the average MOT pass rate is 77.7% with a typical mileage of 81,042 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mercedes-benz C fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 240,078 recorded failures. If you're considering buying RY08 EHV, it's worth having these areas checked by a mechanic before committing.
The Mercedes-benz C typically stays on UK roads for around 32 years. At 18 years old, this Mercedes-benz C is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of RY08 EHV?
You can check the full history of RY08 EHV by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was RY08 EHV registered?
RY08 EHV is a 2008 Mercedes-benz C, first registered on 31 December 2008.
Is RY08 EHV safe to buy?
The MOT history for RY08 EHV shows 23 tests with a 60.9% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does RY08 EHV have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on RY08 EHV. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.