MOT Status
ValidMileage
265,055 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))
Nearside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Offside Front Upper Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Rear Vehicle structure excessively corroded within 30cm of towbar mounting (6.1.6 (i) (i))
Offside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))
Offside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Power steering malfunctioning (2.1.5 (a))
Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Front Floor excessively deteriorated (6.2.4 (a) (i))
Nearside Front Lower Suspension arm ball joint excessively worn outer (5.3.4 (a) (i))
Offside Front Lower Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Parking brake inoperative on one side (1.4.1 (a))
Offside Rear Upper Suspension rod pin or bush excessively worn rear (5.3.4 (a) (i))
Offside Rear Vehicle structure excessively corroded within 30cm of towbar mounting (6.1.6 (i) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Brake pipe excessively corroded (1.1.11 (c))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Axle tie arm (5.3.6 (a) (i))
Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Offside Front Brake pipe excessively corroded (1.1.11 (c))
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Anti-roll bar linkage insecurely attached (5.3.3 (a) (i))
Offside Rear Upper Suspension arm attachment bracket/mounting corroded and seriously weakened (5.3.3 (b) (i))
Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Front Headlamp lens seriously defective (4.1.1 (b) (ii))
Offside Front Headlamp lens seriously defective (4.1.1 (b) (ii))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))
Offside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Central Exhaust has a major leak of exhaust gases (6.1.2 (a))
Exhaust emissions exceed level of metered smoke for a turbo charged engine (8.2.2.2 (b))
Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))
Nearside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a))
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Rear Brake pipe excessively corroded (1.1.11 (c))
Offside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Front Wheel bearing has excessive play (5.1.3 (a) (i))
Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i))
Offside Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a))
Nearside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Offside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Nearside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))
Offside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Driver's view of the road through the swept area of the windscreen materially affected by an obstruction sun visor (3.1 (a) (ii))
Nearside Brake pipe excessively corroded front to rear (1.1.11 (c))
Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt link arm (5.3.4 (b) (ii))
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Rear Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt link arm (5.3.4 (b) (ii))
Nearside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Offside Brake pipe excessively corroded front to rear (1.1.11 (c))
Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt link arm (5.3.4 (b) (ii))
Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Front Wheel bearing has excessive play (5.1.3 (a) (i))
Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i))
Offside Rear Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt link arm (5.3.4 (b) (ii))
Rear Exhaust has a major leak of exhaust gases box (6.1.2 (a))
Nearside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Offside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Nearside Front Brake pipe corroded, covered in grease or other material to flexi (1.1.11 (c))
Nearside Headlamp lens slightly defective (4.1.1 (b) (i))
Nearside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))
Offside Front Brake pipe corroded, covered in grease or other material to flexi (1.1.11 (c))
Offside Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Central Exhaust has a minor leak of exhaust gases (7.1.2)
Front Brake pipe slightly corroded to rear (3.6.B.2c)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Inner Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
underbody surface corrosion
Central Exhaust has a minor leak of exhaust gases (7.1.2)
Front Brake pipe slightly corroded to rear (3.6.B.2c)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Inner Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Nearside Stop lamp not working (1.2.1b)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
underbody surface corrosion
Central Rear Exhaust has a minor leak of exhaust gases Silencer holed. (7.1.2)
Nearside Front Tyre worn on inner and outer edges.
Nearside Headlamp deteriorated but light output not reduced (1.7.5a)
Nearside Front front brake application uneven Lower output and slow to apply. (3.7.B.2)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Central Rear Exhaust has a minor leak of exhaust gases Silencer holed. (7.1.2)
Nearside Front Tyre worn on inner and outer edges.
Nearside Headlamp deteriorated but light output not reduced (1.7.5a)
Rear brake discs slightly pitted
Rear chassis legs have surface corrosion
Slight transmission oil leak
Surface corrosion on the chassis
Nearside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Rear Tyre has ply or cords exposed (4.1.D.1b)
Surface corrosion on the chassis
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Registration plate lamp not working (1.1.C.1d)
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Both front tyres worn unevenly
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Registration plate lamp not working (1.1.C.1d)
Both front tyres worn unevenly
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside front brake binding (3.7.B.1)
Offside Front brake disc excessively pitted (3.5.1h)
Front Brake pad(s) wearing thin (3.5.1g)
How Reliable is the Toyota Land Cruiser?
Based on 446,391 MOT tests across 36,084 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
RY53 AMU is a 2003 Toyota Land Cruiser in Blue with a 2,982cc diesel engine. This vehicle has been through 35 MOT tests with a personal pass rate of 60%.
Across all 2003 Toyota Land Cruiser models, the average MOT pass rate is 75.9% with a typical mileage of 101,881 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Toyota Land Cruiser fails its MOT is brake pipe excessively corroded, accounting for 10,265 recorded failures. If you're considering buying RY53 AMU, it's worth having these areas checked by a mechanic before committing.
The Toyota Land Cruiser typically stays on UK roads for around 36 years. At 23 years old, this Toyota Land Cruiser is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of RY53 AMU?
You can check the full history of RY53 AMU by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was RY53 AMU registered?
RY53 AMU is a 2003 Toyota Land Cruiser, first registered on 19 December 2003.
Is RY53 AMU safe to buy?
The MOT history for RY53 AMU shows 35 tests with a 60% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does RY53 AMU have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on RY53 AMU. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.