MOT Status
ValidMileage
170,505 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Headlamp has a product on the lens but not seriously reducing light output both (4.1.4 (b))
Integral body structure is corroded but structural rigidity is not significantly reduced both side inner & outer sills corroded (6.1.1 (c) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Suspension component mounting prescribed area is corroded but not considered excessive rear suspension (5.3.6 (a) (i))
Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Integral body structure is corroded but structural rigidity is not significantly reduced both side inner sills (6.1.1 (c) (i))
Rear Suspension component corroded but not seriously weakened axle and suspension (5.3.3 (b) (i))
Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Offside Front Headlamp aim too high and too far to the right. (4.1.2 (a))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Integral body structure is corroded but structural rigidity is not significantly reduced both side inner sills (6.1.1 (c) (i))
Rear Suspension component corroded but not seriously weakened axle and suspension (5.3.3 (b) (i))
Front Headlamp has a product on the lens but not seriously reducing light output both (4.1.4 (b))
Integral body structure is corroded but structural rigidity is not significantly reduced both side inner sills (6.1.1 (c) (i))
Suspension component corroded but not seriously weakened rear axle and suspension (5.3.3 (b) (i))
Front Headlamp has a product on the lens but not seriously reducing light output both (4.1.4 (b))
Integral body structure is corroded but structural rigidity is not significantly reduced both side inner sills (6.1.1 (c) (i))
Stop lamp(s) not working (4.3.1 (a) (ii))
Suspension component corroded but not seriously weakened rear axle and suspension (5.3.3 (b) (i))
Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Integral body structure is corroded but structural rigidity is not significantly reduced both side inner & outer sills (6.1.1 (c) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced rear axle & suspension (6.1.1 (c) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Front Windscreen washer provides insufficient washer liquid (3.5 (a))
Integral body structure is corroded but structural rigidity is not significantly reduced both side inner & outer sills (6.1.1 (c) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced rear axle & suspension (6.1.1 (c) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Integral body structure is corroded but structural rigidity is not significantly reduced both side inner sills (6.1.1 (c) (i))
Suspension component mounting prescribed area is corroded but not considered excessive all rear suspension (5.3.6 (a) (i))
Suspension component mounting prescribed area is corroded but not considered excessive rear axle (5.3.6 (a) (i))
Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))
Electronic stability control warning lamp indicates a fault (7.12 (e))
Nearside Front Suspension component pin or bush excessively worn wishbone bush worn (5.3.4 (a) (i))
Offside Front Suspension component pin or bush excessively worn wishbone bush worn (5.3.4 (a) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced both side inner sills (6.1.1 (c) (i))
Suspension component mounting prescribed area is corroded but not considered excessive all rear suspension (5.3.6 (a) (i))
Suspension component mounting prescribed area is corroded but not considered excessive rear axle (5.3.6 (a) (i))
Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))
Battery insecure and likely to cause a short circuit (4.13 (a) (ii))
Electronic stability control warning lamp indicates a fault (7.12 (e))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Nearside Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Offside Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security all rear suspension components and under body various places (6.2.2 (d) (i))
Rear Sub-frame corroded but not seriously weakened various places (5.3.3 (b) (i))
Emissions not tested (8.2.2.2 (e))
Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security innersills and chassis (6.2.2 (d) (i))
Rear Subframe mounting prescribed area is corroded but not considered excessive suspension components (5.3.6 (a) (i))
Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced innersills corroded (6.1.1 (c) (i))
Offside Front Headlamp not working on main beam (4.1.1 (a) (ii))
Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))
Front Upper Suspension arm ball joint excessively worn both sides (5.3.4 (a) (i))
Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Rear Anti-roll bar ball joint excessively worn both sides (5.3.4 (a) (i))
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Rear Tyre slightly damaged both sides (5.2.3 (d) (ii))
How Reliable is the Honda Accord?
Based on 2,311,969 MOT tests across 198,303 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
RY55 SYP is a 2006 Honda Accord in Silver with a 2,204cc diesel engine. This vehicle has been through 27 MOT tests with a personal pass rate of 70.4%.
Across all 2006 Honda Accord models, the average MOT pass rate is 74.3% with a typical mileage of 98,038 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Honda Accord fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 104,224 recorded failures. If you're considering buying RY55 SYP, it's worth having these areas checked by a mechanic before committing.
The Honda Accord typically stays on UK roads for around 33 years. At 20 years old, this Honda Accord is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of RY55 SYP?
You can check the full history of RY55 SYP by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was RY55 SYP registered?
RY55 SYP is a 2006 Honda Accord, first registered on 3 January 2006.
Is RY55 SYP safe to buy?
The MOT history for RY55 SYP shows 27 tests with a 70.4% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does RY55 SYP have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on RY55 SYP. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.