2008 Toyota Prius

Exhaust silencer slightly loose (8.1.1 (b) (i))

Front Headlamp has a product on the light source but not seriously reducing light output both sides (4.1.4 (b))

Offside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Rear Axle corroded

Rear Exhaust noisy (8.1.1 (a))

Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security both sides (6.2.2 (d) (i))

Rear Brake pad(s) missing (1.1.13 (c)) DANGEROUS

Exhaust silencer slightly loose (8.1.1 (b) (i))

Front Headlamp has a product on the light source but not seriously reducing light output both sides (4.1.4 (b))

Offside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Rear Axle corroded

Rear Exhaust noisy (8.1.1 (a))

Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security both sides (6.2.2 (d) (i))

Central Exhaust mounting defective (6.1.2 (a))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Central Exhaust mounting defective (6.1.2 (a))

Front Headlamp has a product on the light source but not seriously reducing light output BOTH SIDES (4.1.4 (b))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Tyre worn close to legal limit/worn on edge BOTH SIDES (5.2.3 (e))

Front Headlamp has a product on the lens but not seriously reducing light output both sides (4.1.4 (b))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Suspension arm pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive both sides (5.3.6 (a) (i))

Front Headlamp lens slightly defective both sides, just see beam pattern (4.1.1 (b) (i))

Front Suspension arm pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Front Tyre worn close to legal limit/worn on edge both sides and edges bald, no cords (5.2.3 (e))

Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive both sides (5.3.6 (a) (i))

Rear Suspension arm pin or bush worn but not resulting in excessive movement both sides, trail arm (5.3.4 (a) (i))

Rear Tyre slightly damaged/cracking or perishing both sides (5.2.3 (d) (ii))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced both sides (6.1.1 (c) (i))

Windscreen damaged but not adversely affecting driver's view chips (3.2 (a) (i))

exhaust rubber on center section broken but system still secure

Both front tyres worn on edges (wearing low)

Corrosion to offside rear floor area / rear sills etc.

Exhaust centre (offside) mounting rubber deteriorated

Both front tyres worn on edges (wearing low)

Corrosion to offside rear floor area / rear sills etc.

Exhaust centre (offside) mounting rubber deteriorated

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Headlamp light intensity severely reduced (4.1.4 (a))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Headlamp light intensity severely reduced (4.1.4 (a))

Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Front wiper blades deteriated-advise renewal

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre not fitted in accordance with side wall instructions (4.1.D.1f)