2008 Mercedes-benz C

Front Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Front Brake disc worn, but not excessively lipped (1.1.14 (a) (i))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Rear Brake hose slightly deteriorated (1.1.12 (b) (ii))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

Offside Rear Brake hose slightly deteriorated (1.1.12 (b) (ii))

Rear slight corrosion on sub frame

Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Brake hose slightly deteriorated (1.1.12 (b) (ii))

Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

Offside Rear Brake hose slightly deteriorated (1.1.12 (b) (ii))

Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

offside door mirror discoloured

sill covers fitted

slight damage to nearside front tyre outer wall

undertrays fitted

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Brake hose slightly deteriorated (1.1.12 (b) (ii))

Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

Offside Rear Brake hose slightly deteriorated (1.1.12 (b) (ii))

Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

offside door mirror discoloured

sill covers fitted

slight damage to nearside front tyre outer wall

undertrays fitted

Brake pipe corroded, covered in grease or other material Both front to rear. (1.1.11 (c))

Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush excessively worn Rear arm. (5.3.4 (a) (i))

Brake pipe corroded, covered in grease or other material Both front to rear. (1.1.11 (c))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

emissions too clean to register

front tyres slightly worn on inner edges

emissions to clean to register

Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt front (2.4.G.2)

Nearside Front Lower Suspension arm has slight play in a ball joint rear (2.4.G.2)

Offside Front Lower Suspension arm has slight play in a ball joint rear (2.4.G.2)

emissions to clean to register

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components