1998 BMW Z3

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))

Exhaust catalytic converter obviously defective (8.2.1.1 (a))

Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))

Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Offside Front Position lamp not working (4.2.1 (a))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

EXHAUST DETERIORATED

Battery insecure (1.9.1)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust has a major leak of exhaust gases exhaust box near rear (7.1.2)

ENGINE RUNNING ROUGH

EXHAUST DETERIORATED

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Exhaust has a minor leak of exhaust gases (7.1.2)

Offside Registration plate lamp not working (1.1.C.1d)

offside rear tyre is perished and cracked no cords or ply exposed

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

nearside rear tyre cut

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Front Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)

Nearside Rear position lamp(s) not working (1.1.A.3b)

Offside Front Anti-roll bar linkage insecure (2.4.G.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)

Front Tyre worn close to the legal limit (4.1.E.1)

nearside rear tyre cut

offside front tyre cut

Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Under-trays fitted obscuring some underside components

exhaust system corroded

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front Brake pipe slightly corroded (3.6.B.2c)

Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Nearside Headlamp aim too low (1.8)

Offside Headlamp aim too low (1.8)

Under-trays fitted obscuring some underside components

exhaust system corroded

Engine covers fitted obscuring some components in the engine bay

Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Under-trays fitted obscuring some underside components

o/s wiper split but not affecting view

rear section exhaust corroded

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Offside Rear Stop lamp not working (1.2.1b)

Suspension arm has excessive play in a ball joint (2.4.G.2)

Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Engine covers fitted obscuring some components in the engine bay

Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Under-trays fitted obscuring some underside components

o/s wiper split but not affecting view

rear section exhaust corroded

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Drag link end ball joint has slight play (2.2.B.1f)

minor oil leak at engine

o/s/f wiper blade torn

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Rear Brake hose excessively chafed (3.6.B.4d)

Nearside Front Shock absorber has a slightly reduced damping effect (2.7.5)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Shock absorber has a slightly worn bush (2.7.4)

Offside Front Shock absorber has a slightly reduced damping effect (2.7.5)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Shock absorber has a slightly worn bush (2.7.4)

Rear brake disc slightly pitted (3.5.1h)

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Brakes imbalanced across an axle (3.7.B.5b)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Shock absorber has a slightly reduced damping effect (2.7.5)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Shock absorber has a slightly worn bush (2.7.4)

Offside Front Shock absorber has a slightly reduced damping effect (2.7.5)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Shock absorber has a slightly worn bush (2.7.4)

Rear brake disc slightly pitted (3.5.1h)