MOT Status
ValidMileage
95,939 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear fog lamp not working (4.5.1 (a) (ii))
Windscreen wiper does not clear the windscreen effectively not big enough (3.4 (b) (ii))
Nearside Front Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Exhaust has a minor leak of exhaust gases at manifold (6.1.2 (a))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive sub-frame mount corroded (5.3.6 (a) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive sub-frame mount corroded (5.3.6 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Battery insecure and likely to fall from carrier (4.13 (a) (ii))
Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill holed (6.1.1 (c) (i))
Nearside Headlamp light intensity severely reduced (4.1.4 (a))
Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill holed (6.1.1 (c) (i))
Nearside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill holed (6.1.1 (c) (i))
Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill holed (6.1.1 (c) (i))
Offside Headlamp light intensity severely reduced (4.1.4 (a))
Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill holed (6.1.1 (c) (i))
Offside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill holed (6.1.1 (c) (i))
Rear fog lamp not working (4.5.1 (a) (ii))
Exhaust has a minor leak of exhaust gases at manifold (6.1.2 (a))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive sub-frame mount corroded (5.3.6 (a) (i))
Nearside Headlamp lens slightly defective (4.1.1 (b) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive sub-frame mount corroded (5.3.6 (a) (i))
Offside Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))
Front Service brake excessively fluctuating (1.2.1 (e))
Nearside Front Brake pipe excessively corroded (1.1.11 (c))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Nearside Rear Anti-roll bar pin or bush excessively worn D bush (5.3.4 (a) (i))
Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Front Brake pipe excessively corroded (1.1.11 (c))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Rear Anti-roll bar pin or bush excessively worn D bush (5.3.4 (a) (i))
Exhaust has a minor leak of exhaust gases center flexi pipe (6.1.2 (a))
Exhaust has a minor leak of exhaust gases tail box (6.1.2 (a))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Service brake fluctuating, but not excessively (1.2.1 (e))
Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))
Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Nearside Rear Anti-roll bar pin or bush excessively worn D bush (5.3.4 (a) (i))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Rear Anti-roll bar pin or bush excessively worn D bush (5.3.4 (a) (i))
Nearside Front Upper Shock absorbers has a slightly worn bush top mount (5.3.2 (c))
Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Upper Shock absorbers has a slightly worn bush top mount (5.3.2 (c))
Offside Front Windscreen wiper blade defective smearing (3.4 (b) (i))
Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Rear Service brake fluctuating, but not excessively (1.2.1 (e))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Service brake fluctuating, but not excessively (1.2.1 (e))
Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill holed (6.1.1 (c) (i))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Rear Service brake fluctuating, but not excessively (1.2.1 (e))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Front Exhaust has a major leak of exhaust gases flexi pipe (7.1.2)
Offside Rear fog lamp not working (1.3.2b)
temporary fuel cap fitted
Rear fog lamp tell tale not working (1.3.1b)
How Reliable is the Mazda E Series?
Based on 81,836 MOT tests across 9,731 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
S109 JSC is a 2012 Mazda E Series in Silver with a 1,998cc petrol engine. This vehicle has been through 22 MOT tests with a personal pass rate of 63.6%.
Across all 2012 Mazda E Series models, the average MOT pass rate is 69.0% with a typical mileage of 123,977 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda E Series fails its MOT is brake pipe excessively corroded, accounting for 4,794 recorded failures. If you're considering buying S109 JSC, it's worth having these areas checked by a mechanic before committing.
The Mazda E Series typically stays on UK roads for around 36 years. At 14 years old, this Mazda E Series is still in the earlier part of its expected life.
Frequently Asked Questions
How do I check the history of S109 JSC?
You can check the full history of S109 JSC by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was S109 JSC registered?
S109 JSC is a 2012 Mazda E Series, first registered on 1 July 2012.
Is S109 JSC safe to buy?
The MOT history for S109 JSC shows 22 tests with a 63.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does S109 JSC have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on S109 JSC. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.