1998 Fiat Coupe

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive floor pan (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive floor pan (5.3.6 (a) (i))

Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Offside Front Headlamp aim too high aim adjust to correct level. (4.1.2 (a))

Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Exhaust carbon monoxide content at idle exceeds manufacturer's specified limits (8.2.1.2 (b))

Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))

Rear Exhaust mounting defective (6.1.2 (a))

Offside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Rear Exhaust mounting defective (6.1.2 (a))

Tyre slightly damaged all (5.2.3 (d) (ii))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive floor pan (5.3.6 (a) (i))

Offside Front Inner Drive shaft joint constant velocity boot severely deteriorated clip missing (6.1.7 (g) (i))

Offside Seat belt anchorage prescribed area is corroded but not considered excessive sill (7.1.1 (a) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Nearside Front coil spring broken (2.4.C.1a)

Nearside Rear wheel bearing rough when rotated (2.6.1)

Nearside Registration plate lamp not fitted (1.1.C.1b)

Offside Front position lamp(s) not working All the time (1.1.A.3b)

Offside Registration plate lamp not fitted (1.1.C.1b)

Rear registration plate missing (6.3.1a)

Windscreen washer provides insufficient washer liquid (8.2.3)

Rear bumper missing

Exhaust has a major leak of exhaust gases (7.1.2)

Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Rear registration plate delaminated (6.3.1d)

front tyres worn on inner edges

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)

Offside Front coil spring incomplete (2.4.C.1a)

Rear Exhaust system not adequately supported (7.1.1)

Nearside Front position lamp(s) not in good working order (function impaired) (1.1.4a)

Nearside Inner Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Registration plate lamp not working (1.1.5c)

Offside Inner Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Inner Front brake disc slightly scored (3.5.1h)