2004 Toyota MR2

Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Front Brake hose has slight corrosion to ferrule both sides (1.1.12 (f) (i))

Front Headlamp lens slightly defective both sides (4.1.1 (b) (i))

Oil leak, but not excessive engine (8.4.1 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened corroded on inside face (1.1.14 (a) (ii))

Rear Brake pad(s) wearing thin starting to wear thin (1.1.13 (a) (ii))

Rear Coil spring corroded both sides (5.3.1 (b) (i))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced in front of both rear wheels corroded, inner and outer sill (6.1.1 (c) (i))

Rear Sub-frame corroded and seriously weakened (5.3.3 (b) (i))

Front Brake hose has slight corrosion to ferrule both sides (1.1.12 (f) (i))

Front Headlamp lens slightly defective both sides (4.1.1 (b) (i))

Oil leak, but not excessive engine (8.4.1 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened corroded on inside face (1.1.14 (a) (ii))

Rear Brake pad(s) wearing thin starting to wear thin (1.1.13 (a) (ii))

Rear Coil spring corroded both sides (5.3.1 (b) (i))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced in front of both rear wheels corroded, inner and outer sill (6.1.1 (c) (i))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Front headlamp lenses are fading

Nearside Front Headlamp aim too low (1.8)

Nearside Rear rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Offside Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Parking brake lever has no reserve travel (3.1.6b)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Exhaust has a minor leak of exhaust gases (7.1.2)

Tyre worn close to the legal limit (4.1.E.1)

Front brake disc slightly scored (3.5.1h)