1998 Rover 416

all tyres soft

both front tyres close to limit

Body has a sharp edge caused by corrosion n/s/r and o/s/r (6.1.C.1)

Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)

Offside Rear rear brake binding (3.7.B.1)

Stop lamp not working both rear lamps (1.2.1b)

all tyres soft

both front tyres close to limit

Nearside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Rear Trailing arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Stop lamp not working (1.2.1b)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Rear Trailing arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Stop lamp not working (1.2.1b)

Offside rear brake binding (3.7.B.1)

all tyres underinflated

side wall damage to n/s/f and n/s/r tyre

Child seat fitted not allowing full inspection of adult belt

Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Parking brake lever has little reserve travel (3.1.6b)

noise from engine / gearbox

front shock asorbers appear to siezed and have no damping effect

Battery insecure (1.9.1)

Brakes imbalanced across an axle (3.7.B.5b)

Centre Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Registration plate lamp not working (1.1.C.1d)

Child seat fitted not allowing full inspection of adult belt

Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Parking brake lever has little reserve travel (3.1.6b)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

noise from engine / gearbox

front shock asorbers appear to siezed and have no damping effect

Front registration plate faded but not likely to be misread (6.3.1d)

Nearside Outer Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear registration plate faded but not likely to be misread (6.3.1d)

both nearside tyre walls badly scuffed

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Stop lamp not working (1.2.1b)

Parking brake: efficiency below requirements (3.7.B.7)

Front registration plate faded but not likely to be misread (6.3.1d)

Nearside Outer Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear registration plate faded but not likely to be misread (6.3.1d)

both nearside tyre walls badly scuffed

Nearside Outer Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Brake pad(s) wearing thin (3.5.1g)

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Nearside Front constant velocity joint gaiter split (2.5.C.1a)

Nearside Headlamp not working on dipped beam (1.7.5a)

Offside Headlamp not working on dipped beam (1.7.5a)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Front Direction indicators incorrect colour (1.4.A.2f)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)

Offside Front constant velocity joint gaiter split (2.5.C.1a)

Rear Direction indicators incorrect colour (1.4.A.2f)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)