2005 Suzuki Jimny

Integral body structure is corroded but structural rigidity is not significantly reduced rear floor pan (6.1.1 (c) (i))

Offside Rear Brake pipe corroded, covered in grease or other material front to rear pipe (1.1.11 (c))

Rear Passenger seat(s) missing at time of test

Rear Standard fitment seat belt missing

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Service brake efficiency below requirements (1.2.2 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Integral body structure is corroded but structural rigidity is not significantly reduced rear floor pan (6.1.1 (c) (i))

Offside Rear Brake pipe corroded, covered in grease or other material front to rear pipe (1.1.11 (c))

Rear Passenger seat(s) missing at time of test

Rear Standard fitment seat belt missing

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced floor pan (6.1.1 (c) (i))

Offside Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Rear Passenger seat(s) missing at time of test

Rear Standard fitment seat belt missing

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Nearside Front Upper Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Offside Front Upper Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Front Tyre worn close to legal limit/worn on edge very low (5.2.3 (e))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced floor pan (6.1.1 (c) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Rear Passenger seat(s) missing at time of test

Rear Standard fitment seat belt missing

Nearside Front Upper Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Upper Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

front brake pads wearing low

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust has a major leak of exhaust gases rear joint (6.1.2 (a))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Nearside Front Upper Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Upper Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

front brake pads wearing low

Nearside Rear brake back plate deteriorated

Offside Rear brake back plate deteriorated

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Nearside Rear brake back plate deteriorated

Offside Rear brake back plate deteriorated

Brake pipe corroded, covered in grease or other material both pipes on rear axle (1.1.11 (c))

Brake pipe corroded, covered in grease or other material front to rear pipe (1.1.11 (c))

Brake pipe corroded, covered in grease or other material both pipes across rear axle (1.1.11 (c))

Brake pipe corroded, covered in grease or other material front to rear pipe (1.1.11 (c))

Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Brake pipe corroded, covered in grease or other material both pipes across rear axle (1.1.11 (c))

Brake pipe corroded, covered in grease or other material front to rear pipe (1.1.11 (c))

Brake pipe corroded, covered in grease or other material main front to rear pipe (1.1.11 (c))

Nearside Front Lower Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Offside Front Lower Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced body mount under arch corroded and holed (6.1.1 (c) (i))

Brake pipe corroded, covered in grease or other material heavy underseal (1.1.11 (c))

underside heavily undersealed

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

exhaust back box corroded

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

Offside Windscreen wiper blade insecure (8.2.2)

Brakes imbalanced across an axle (3.7.B.5b)

Centre Rear Exhaust system not adequately supported (7.1.1)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

exhaust hanger broken centre section.

front brake pads slightly worn.