1998 Mitsubishi Space Star

Brake pedal spongy (3.3.B.1b)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wing (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded inner wing/several places (2.4.A.3)

Offside Rear Seat belt anchorage prescribed area is excessively corroded outer sill (5.2.6)

Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded inner wing (2.4.A.3)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Service brake: efficiency below requirements (3.7.B.7)

Brake pipe slightly corroded (3.6.B.2c)

Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)

Nearside Front Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Nearside Rear Radius arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Rear Radius arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

fron bonnet started to corode

o/s rear corner lower to chassis corroded and holed

underside of car corroded

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Nearside Front Front constant velocity joint is insecure (2.5.C.1b)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Front constant velocity joint is insecure (2.5.C.1b)

Offside Rear Stop lamp not working (1.2.1b)

Offside Rear Tyre has ply or cords exposed (4.1.D.1b)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

fron bonnet started to corode

o/s rear corner lower to chassis corroded and holed

underside of car corroded

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

edges wearing thin on botrh rear tyres

exhaust corroded

o/s/r brake back plate corroded

under side of vehicle corroded

Brakes imbalanced across an axle (3.7.B.5b)

Offside rear brake excessively fluctuating (3.7.B.3)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

edges wearing thin on botrh rear tyres

exhaust corroded

o/s/r brake back plate corroded

under side of vehicle corroded

Brake pipe slightly corroded (3.6.B.2c)

Oil leak

front registration plate cracked and insecure

Bonnet cannot be secured in the closed position (8.4.1)

Nearside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Rear Registration plate lamp not working (1.1.C.1d)

Brake pipe slightly corroded (3.6.B.2c)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Oil leak

front registration plate cracked and insecure

Nearside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

spare tyre put to n/s/f , n/s/f tyre to o/s/f.

Nearside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

spare tyre put to n/s/f , n/s/f tyre to o/s/f.

Front Brake pad(s) wearing thin (3.5.1g)

Offside Outer Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Offside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Outer Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Nearside Registration plate lamp not working (1.1.5c)

Offside Outer Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Offside Rear fog lamp not working (1.3.2b)

Offside Windscreen washer provides insufficient washer liquid (8.2.3)

both outer cv boot security

centre exhaust bracket broken

Nearside Outer Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Offside Outer Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)