2003 Mazda Bongo

Exhaust emissions exceed level of metered smoke for a turbo charged engine (8.2.2.2 (b))

Exhaust has a major leak of exhaust gases rear silencer (6.1.2 (a))

Nearside Rear Suspension component mounting prescribed area is inadequately repaired under sill (5.3.6 (a) (i))

Offside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength undersill (5.3.6 (a) (i))

Suspension component mounting prescribed area excessively damaged significantly reducing structural strength both rear outer sills (5.3.6 (a) (i))

Brake pad(s) wearing thin both rear (1.1.13 (a) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

both floors, chassis rails, under sills, outer sills inner flitches and cross members slightly corroded

rear cross member badly holed and corroded but not in prescribed area

Nearside Rear cross member corroded but not in prescribed area

both floors, chassis rails, under sills, outer sills, inner flitches and cross members slightly corroded

brake disc worn, pitted or scored, but not seriously weakened both front (3.5.1i)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Suspension component mounting prescribed area is excessively corroded under sill in several places (2.4.A.3)

Suspension component mounting prescribed area is excessively corroded both rear chassis rails (2.4.A.3)

Nearside Rear cross member corroded but not in prescribed area

both floors, chassis rails, under sills, outer sills, inner flitches and cross members slightly corroded

brake disc worn, pitted or scored, but not seriously weakened both front (3.5.1i)

Nearside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Front Brake pipe slightly corroded metal (3.6.B.2c)

both floors, chassis rails and under sills slightly corroded

nearside centre under sill holed and corroded but not in prescribed area

nearside rear axle seal leaking

Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt both front (2.4.G.2)

Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)

Nearside Rear Suspension component mounting prescribed area is excessively corroded under sill (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded chassis rail out rigger (2.4.A.3)

Offside Headlamp not working on main beam (1.7.5a)

Offside Rear Suspension component mounting prescribed area is excessively corroded chassis rail (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded inner flitch (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is inadequately repaired under sill (2.4.A.3)

Nearside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Front Brake pipe slightly corroded metal (3.6.B.2c)

both floors, chassis rails and under sills slightly corroded

nearside centre under sill holed and corroded but not in prescribed area

nearside rear axle seal leaking

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive AND OFFSIDE (2.4.A.3)

Offside Front Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Engine covers fitted obscuring some components in the engine bay

Nearside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Under-trays fitted obscuring some underside components

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

both rear bump stops missing

front and rear panels on underside corroding

near side underside off sill corroding

rear pads look to be near minimum thickness

spare wheel on underside missing

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Front position lamp(s) not working (1.1.A.3b)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Rear fog lamp not working (1.3.2b)

Rear fog lamp tell tale not working (1.3.1b)

Engine covers fitted obscuring some components in the engine bay

Nearside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Under-trays fitted obscuring some underside components

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

both rear bump stops missing

front and rear panels on underside corroding

near side underside off sill corroding

rear pads look to be near minimum thickness

spare wheel on underside missing

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

grease around ball joints

o/s/f o/s/r and n/s/f tyres cracked and perished

underside corroded and holed

Nearside Rear Suspension component mounting prescribed area is inadequately repaired (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

grease around ball joints

o/s/f o/s/r and n/s/f tyres cracked and perished

underside corroded and holed

BOTH outer sills corroded and holed

Exhaust has a minor leak of exhaust gases (7.1.2)

exhaust corroded

gearbox oil leak

underside of vehicle plus components corroded

Exhaust has a major leak of exhaust gases (7.1.2)

Fuel cap/sealing device missing (7.2.4a)

Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Rear fog lamp tell tale not working (1.3.1b)

BOTH outer sills corroded and holed

Exhaust has a minor leak of exhaust gases (7.1.2)

exhaust corroded

gearbox oil leak

underside of vehicle plus components corroded

Centre Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front constant velocity joint gaiter split (2.5.C.1a)

Offside Rear fog lamp missing (1.3.2a)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Rear fog lamp tell tale missing (1.3.1b)

Rear Brake pad(s) wearing thin (3.5.1g)

Offside Rear fog lamp not working (1.3.2b)

Brake pedal creeps down when held under pressure (3.3.B.1a)