1999 Suzuki Swift

Brake hose slightly deteriorated all (1.1.12 (b) (ii))

Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Rear Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Exhaust has a minor leak of exhaust gases (7.1.2)

Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Front Vehicle structure has slight corrosion (6.1.B.2)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Vehicle structure has slight corrosion (6.1.B.2)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Front Upper Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Nearside Front Seat belt stitching slightly frayed (5.2.2b)

Offside Front Seat belt stitching slightly frayed (5.2.2b)

Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear position lamp(s) slightly affected by the operation of another lamp (1.1.A.3f)

Temporary fuel cap fitted

centre sill/floor area on o/s sign os corrosion and a slight hole. appears to have been repaired via a plate from inside. due to the fact carpet has been glued, unable to remove carpet/trim to inspect. benefit given to presenter.

presnter not inspected center sill for corrsion unable to do a visuale check

reccomend removal of o/s/f carpet and trim to inspect prescribed seatbelt area and trim.

signs of corrosion rear suspenshion & chassis not excesive at time of test

surface corrosion n/s sill

taped repair o/s/r lens meets requirements at time of test

Offside Inner Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear position lamp(s) slightly affected by the operation of another lamp (1.1.A.3f)

Temporary fuel cap fitted

centre sill/floor area on o/s sign os corrosion and a slight hole. appears to have been repaired via a plate from inside. due to the fact carpet has been glued, unable to remove carpet/trim to inspect. benefit given to presenter.

reccomend removal of o/s/f carpet and trim to inspect prescribed seatbelt area and trim.

signs of corrosion rear suspenshion & chassis not excesive at time of test

surface corrosion n/s sill

taped repair o/s/r lens meets requirements at time of test

Inner Front constant velocity joint is excessively worn (2.5.C.1b)

Nearside Rear rear brake binding (3.7.B.1)

Offside Front Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Rear rear brake recording little or no effort (3.7.B.5a)

Outer Front constant velocity joint is excessively worn (2.5.C.1b)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Steering rack gaiter deteriorated (2.2.D.2d)

Horn not working (1.6.2a)

Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Steering rack gaiter deteriorated (2.2.D.2d)

Nearside Front constant velocity joint gaiter split (2.5.C.1a)

Offside Rear wheel bearing rough when rotated (2.6.1)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Temporary fuel cap fitted

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Front Exhaust has a major leak of exhaust gases (7.1.2)

Offside Front constant velocity joint gaiter split (2.5.C.1a)

Rear registration plate delaminated (6.3.1d)

Temporary fuel cap fitted

Nearside Front position lamp(s) not working (1.1.A.3b)

Brakes imbalanced across an axle (3.7.B.5b) DANGEROUS