2010 Mazda Bongo

Anti-roll bar pin or bush worn but not resulting in excessive movement both rear (5.3.4 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Service brake fluctuating, but not excessively (1.2.1 (e))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Service brake fluctuating, but not excessively (1.2.1 (e))

front brake discs slightly worn/corroded

front panel behind bumper corroded / nearside

headlamps glazed slightly affecting beam image

minor oil leaks

nearside rear brake binding

nearside wiper worn

offside rear coil spring corroded

Anti-roll bar pin or bush worn but not resulting in excessive movement both rear (5.3.4 (a) (i))

Front Service brake fluctuating, but not excessively (1.2.1 (e))

minor oil leaks

nearside front inner sill corroded

offside rear coil spring slightly corroded

slight surface corrosion on all brake discs

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Anti-roll bar pin or bush worn but not resulting in excessive movement both rear (5.3.4 (a) (i))

Front Service brake fluctuating, but not excessively (1.2.1 (e))

minor oil leaks

nearside front inner sill corroded

offside rear coil spring slightly corroded

slight surface corrosion on all brake discs

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Sill corroded.

Offside Rear Sill corroded.

Nearside Rear Outer Sill corroded

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Rear Outer Panel corroded and holed not considered a load bearing or structural part

Oil leak, but not excessive (8.4.1 (a) (i))

Fluid leak, but not excessive Coolant (8.4.1 (a) (i))

Nearside Headlamp light output slightly reduced

Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive Sill (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Nearside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Offside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Oil leak ()

Rear cross member heavily corroded nearside but not within prescribed area

Undertrays fitted

Nearside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Offside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Nearside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Stop lamp has light sources not illuminating, but not more than 50% (1.2.1b)

both rear tyres would benefit from replacing as they are worn to just above 1.6mm. The nearside tyre is also quite worn on the outer tread area

Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Stop lamp has light sources not illuminating, but not more than 50% (1.2.1b)

Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

both rear tyres would benefit from replacing as they are worn to just above 1.6mm. The nearside tyre is also quite worn on the outer tread area

Offside Front Seat belt stitching badly frayed (5.2.2b)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Outer Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Outer Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Seat belt stitching slightly frayed (5.2.2b)

Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Seat belt stitching slightly frayed (5.2.2b)

Front Tyre worn close to the legal limit (4.1.E.1)

Rear Tyre worn close to the legal limit (4.1.E.1)