2004 Yamaha FZ6

Rear Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Rear reflector missing (4.8.2 (a) (ii))

Nearside Front Brake caliper cracked and braking performance affected (1.1.16 (a) (ii)) DANGEROUS

Central Rear Missing bolt on the rear mudguard (center/front)

Nearside Front Shock absorber has a light misting of oil (5.3.2 (b))

Rear Wheel alignment slightly misaligned (2.4 (a))

Front tyre perished slightly

Front Stop lamp not working (4.3.1 (a) (ii))

Rear Position lamp not working (4.2.1 (a))

Rear Stop lamp not working (4.3.1 (a) (ii))

Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii))

Rear Brake excessively binding (1.2.1 (f))

Front Brake binding but not excessively (1.2.1 (f))

Rear Roller brake test indicates a slightly grabbing brake (3.3.A1b)

Rear Roller brake test indicates a slightly juddering brake (3.3.A1b)

split in rear tyre can not see cored, less than 25mm long

Rear wheel bearings have slight free play (2.4.A.2c)

Headlamp aim too low (1.6)

Rear wheel bearings have slight free play (2.4.A.2c)

Nearside Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Drive chain excessively loose (6.2.1d)

Front Roller brake test indicates a binding brake (3.3.A1a)

Front position lamp does not illuminate immediately when switched on (1.1.3a)

Horn not working (1.7.3a)

Rear Brake disc(s) excessively worn (3.2.A1l)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Steering movement excessively stiff with the weight on the lower bearing (2.2.1a)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Drive chain worn to excess (6.2.1e)

Front Drive chain sprocket worn to excess (6.2.1e)

Front Roller brake test indicates a binding brake (3.3.A1a)

Rear Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Wheel alignment slightly misaligned. (2.5.1)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii)) DANGEROUS

Rear Tyre valve stem damaged which could cause sudden tyre deflation (4.1.2c) DANGEROUS