2007 Honda S2000

Front Service brake binding but not excessively (1.2.1 (f))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Seat belt slightly damaged (7.1.2 (b) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Front Service brake excessively binding (1.2.1 (f))

Nearside Rear Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Seat belt slightly damaged (7.1.2 (b) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))

Front Headlamp has a product on the light source but not seriously reducing light output (4.1.4 (b))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Nearside Front Brake hose excessively chafed (1.1.12 (b) (ii))

Nearside Front Headlamp aim too low (4.1.2 (a))

Offside Front Headlamp aim too high (4.1.2 (a))

Rear Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Steering column shaft modified such that the steering is adversely affected steering shaft fouling exhaust manifold (2.1.3 (f) (ii)) DANGEROUS

Front Headlamp lens slightly defective (4.1.1 (b) (i))

Front Service brake binding but not excessively (1.2.1 (f))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Nearside Front Anti-lock braking system wiring excessively damaged (1.6 (d))

Offside Front Anti-lock braking system wiring excessively damaged (1.6 (d))

Exhaust noisy (8.1.1 (a))

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Hazard warning lamps inoperative (1.4.B.1b)

Nearside Headlamp aim too low (1.8)

Nearside Rear Outer Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Headlamp aim too high (1.8)

Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Outer Suspension arm has slight play in a ball joint (2.4.G.2)

Engine management light on

Temp catylist fitted

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Nearside Rear Wheel bolt(s) missing (4.2.A.1e)

engine check light on

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Direction indicator slightly discoloured (1.4.A.2f)

Nearside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Rear Brake pad(s) wearing thin (3.5.1g)

Centre Rear Registration plate lamp not working (1.1.C.1d)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Nearside Front Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Nearside Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.2.C.1c)

Nearside Rear Road wheel bead rim badly distorted (4.2.A.1a)

Offside Front Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Offside Front Front position lamp(s) not working (1.1.A.3b)

Offside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Direction indicator slightly discoloured (1.4.A.2f)

Nearside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear exhaust rubber snapped but system supported

Front registration plate incorrect (6.3.1a)

Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Coolant leak

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Headlamp aim too high (1.8)

Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)