1998 Ford Ka

Fuel cap/sealing device does not fasten securely by positive means (7.2.4b)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2) DANGEROUS

Nearside Rear Trailing arm rubber bush deteriorated resulting in excessive movement (2.4.G.2) DANGEROUS

Offside Rear Trailing arm rubber bush deteriorated resulting in excessive movement (2.4.G.2) DANGEROUS

Offside Rear coil spring broken (2.4.C.1a) DANGEROUS

Nearside Front Vehicle structure has slight corrosion (6.1.B.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Vehicle structure has slight corrosion (6.1.B.2)

Parking brake lever has little reserve travel (3.1.6b)

Battery insecure (1.9.1)

Fuel cap/sealing device does not fasten securely by positive means (7.2.4b)

Nearside Front Brake hose has insufficient room to move, resulting in fouling on any part (3.6.B.4a)

Nearside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Headlamp aim too high (1.8)

Nearside Rear Trailing arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Road wheel bead rim badly distorted (4.2.A.1a)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear coil spring broken (2.4.C.1a)

Offside Stop lamp has less than 50% of the light sources illuminating (1.2.1b)

Offside Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength (2.4.A.3)

Offside Suspension component mounting prescribed area is inadequately repaired (2.4.A.3)

Parking brake lever has no reserve travel (3.1.6b)

Power steering fluid level below minimum (2.3.1)

Rear Tyre(s) incorrect because tyres with different aspect ratios are fitted on the same axle. (4.1.A.1a)

Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)

Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Rear Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)

Offside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

o/s front tyre cracking in tread

Rear Exhaust noisy (7.1.4)

engine oil leak

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

nearside and offside front floor pans have surface corrosion.

Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Vehicle structure has slight corrosion (6.1.A.1)

Offside Vehicle structure has slight corrosion (6.1.A.1)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Stop lamp not working (1.2.1b)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Vehicle structure has slight corrosion (6.1.A.1)

Offside Vehicle structure has slight corrosion (6.1.A.1)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Front Brake pad(s) wearing thin (3.5.1g)

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is distorted but not considered excessive (2.4.A.3)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is distorted but not considered excessive (2.4.A.3)

Offside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3) DANGEROUS

Front Brake pad(s) wearing thin (3.5.1g)

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is distorted but not considered excessive (2.4.A.3)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is distorted but not considered excessive (2.4.A.3)

Offside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Brake hose excessively deteriorated (3.6.B.4d)

Nearside Front Headlamp aim too low (1.8)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Headlamp aim too low (1.8)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Brake hose slightly deteriorated (3.6.B.4d)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Rear wheel bearing rough when rotated (2.6.1)

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Bonded suspension unit deteriorated and cannot function as intended (2.4.F.3)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Front Bonded suspension unit deteriorated and cannot function as intended (2.4.F.3)