MOT Status
ExpiredMileage
146,589 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Rear Lower Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Rear Lower Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Sub-frame corroded and seriously weakened (2.4.G.1)
Nearside Rear Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b)
Offside Front Lower Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front Lower Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Lower Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Rear Lower Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Sub-frame corroded and seriously weakened (2.4.G.1)
Offside Registration plate lamp not illuminating the registration plate (1.1.C.1e)
Rear Exhaust system not adequately supported (7.1.1)
Nearside Brake cable insecure (3.5.1d) DANGEROUS
Nearside rear parking brake recording little or no effort (3.7.B.6a) DANGEROUS
Offside rear parking brake recording little or no effort (3.7.B.6a) DANGEROUS
Parking brake lever has no reserve travel (3.1.6b) DANGEROUS
Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS
Front Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front suspension has slight deterioration of the bonding between metal and flexible material of an upper support bearing (2.5.B.3a)
Offside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Shock absorber has slight corrosion to the casing (2.7.2a)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Shock absorber has slight corrosion to the casing (2.7.2a)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Rear An item not tested (Manual)
Nearside Rear Lower Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Lower Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Brakes imbalanced across an axle (3.7.B.5b) DANGEROUS
Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a) DANGEROUS
Nearside rear brake binding (3.7.B.1) DANGEROUS
front brake application uneven (3.7.B.2) DANGEROUS
rear brake application uneven (3.7.B.2) DANGEROUS
Nearside Front Shock absorber has slight corrosion to the casing (2.7.2a)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Shock absorber has slight corrosion to the casing (2.7.2a)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front Track rod end has sharp grooves in the neck (2.2.C.1a)
Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)
Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside front brake grabbing severely (3.7.A.2b)
front brake application uneven (3.7.B.2)
Centre Exhaust system not adequately supported (7.1.1)
Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front Windscreen wiper blade insecure (8.2.2)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Windscreen wiper blade insecure (8.2.2)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Direction indicator not working (1.4.A.2c)
Nearside Front Brake pipe excessively corroded (3.6.B.2c)
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Nearside Rear Registration plate lamp not working (1.1.5c)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Stop lamp not working (1.2.1b)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Mazda Demio?
Based on 136,409 MOT tests across 10,090 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
S209 JHN is a 1998 Mazda Demio in Silver with a 1,300cc petrol engine. This vehicle has been through 13 MOT tests with a personal pass rate of 46.2%.
Across all 1998 Mazda Demio models, the average MOT pass rate is 70.4% with a typical mileage of 75,116 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda Demio fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 7,070 recorded failures. If you're considering buying S209 JHN, it's worth having these areas checked by a mechanic before committing.
The Mazda Demio typically stays on UK roads for around 28 years. At 28 years old, this Mazda Demio is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of S209 JHN?
You can check the full history of S209 JHN by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was S209 JHN registered?
S209 JHN is a 1998 Mazda Demio, first registered on 22 September 1998.
Is S209 JHN safe to buy?
The MOT history for S209 JHN shows 13 tests with a 46.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does S209 JHN have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on S209 JHN. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.