2011 Suzuki Jimny

Front Brake disc worn, pitted or scored, but not seriously weakened both front discs corroded (1.1.14 (a) (ii))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced mounting area (6.1.1 (c) (i))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced mounting area (6.1.1 (c) (i))

Offside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Front Brake disc worn, pitted or scored, but not seriously weakened both front discs corroded (1.1.14 (a) (ii))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced mounting area (6.1.1 (c) (i))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced mounting area (6.1.1 (c) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened both front (1.1.14 (a) (ii))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Front Brake pipe excessively corroded to rear brake pipe excessively corroded rear part (1.1.11 (c))

Front Brakes imbalanced across an axle 44% (1.2.1 (b) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength tow bar mounting area (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength axle pannard rod mounting area (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength axle pannard rod mounting area (5.3.6 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened both front corroded (1.1.14 (a) (ii))

Lower Integral body structure is corroded but structural rigidity is not significantly reduced body and chassis (6.1.1 (c) (i))

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Brake pipe corroded, covered in grease or other material corroded (1.1.11 (c))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security centre mount (6.2.2 (d) (i))

Nearside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security centre mount (6.2.2 (d) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Offside Front Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security centre mount (6.2.2 (d) (i))

Offside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security centre mount (6.2.2 (d) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear exhaust corroded

Vehicle structure is corroded but structural rigidity is not significantly reduced all over corrosion (6.1.1 (c) (i))

Nearside Front Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Offside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Emissions not tested due to blowing (8.2.1.2 (d))

Rear Exhaust has a major leak of exhaust gases joint (6.1.2 (a))

Nearside Front Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Offside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Nearside Front Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Nearside Front Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced outrigger to body mounting. (6.1.1 (c) (i))

Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced outrigger to body mounting forward of rear wheel. (6.1.1 (c) (i))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced outrigger to body mounting. (6.1.1 (c) (i))

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced outrigger to body mounting forward of rear wheel. (6.1.1 (c) (i))

Brake pipe corroded, covered in grease or other material Front to rear pipe at rear of vehicle. (1.1.11 (c))

Nearside Front Brake pipe corroded, covered in grease or other material where brake hose enters inner wing. (1.1.11 (c))

Exhaust heat shield loose front

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Tyre tread depth below requirements of 1.6mm outer edge (4.1.E.1)