MOT Status
ValidMileage
202,797 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Rear Position lamp not working (4.2.1 (a) (ii))
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Vehicle structure slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))
Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Front Fluid leak harmful to the environment or a risk to other road users (8.4.1 (a) (i))
Nearside Front Upper Suspension component ball joint excessively worn (5.3.4 (a) (i))
Offside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Front Suspension component mounting prescribed area is corroded but not considered excessive both front floor pans corroded but not considered to be excessive (2.4.A.3)
Nearside Front Upper Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Front Obligatory mirror damaged, but not seriously affecting the rear view (8.1.2a)
Offside Front Upper Suspension arm has slight play in a ball joint (2.4.G.2)
Rear Tyre worn close to the legal limit tyres worn close to limit on rear (4.1.E.1)
Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)
Front Suspension component mounting prescribed area is corroded but not considered excessive both front floor pans corroded but not considered to be excessive (2.4.A.3)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front Upper Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Front Obligatory mirror damaged, but not seriously affecting the rear view (8.1.2a)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Upper Suspension arm has slight play in a ball joint (2.4.G.2)
Rear Tyre worn close to the legal limit tyres worn close to limit on rear (4.1.E.1)
Nearside Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Front Brake pipe slightly corroded (3.6.B.2c)
Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Front Brake pipe slightly corroded (3.6.B.2c)
Rear Brake pipe slightly corroded (3.6.B.2c)
Front Brake pipe slightly corroded (3.6.B.2c)
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Brake pipe slightly corroded (3.6.B.2c)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front suspension has excessive play in a upper suspension ball joint (2.5.B.1a)
Front Brake pipe slightly corroded (3.6.B.2c)
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Brake pipe slightly corroded (3.6.B.2c)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Brake pad(s) wearing thin (3.5.1g)
Rear Brake pipe slightly corroded (3.6.B.2c)
Exhaust has a minor leak of exhaust gases (7.1.2)
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Track rod end ball joint has slight play (2.2.B.1f)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front Brake pad(s) wearing thin (3.5.1g)
Front Brake pipe slightly corroded (3.6.B.2c)
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Track rod end ball joint has slight play (2.2.B.1f)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Brake pad(s) wearing thin (3.5.1g)
Rear Brake pipe slightly corroded (3.6.B.2c)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)
Rear registration plate deteriorated (6.3.1d)
Front Brake pad(s) wearing thin (3.5.1g)
Front Brake pipe slightly corroded (3.6.B.2c)
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Track rod end ball joint has slight play (2.2.B.1f)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Brake pad(s) wearing thin (3.5.1g)
Rear Brake pipe slightly corroded (3.6.B.2c)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front Brake pipe slightly corroded (3.6.B.2c)
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Brake pipe slightly corroded (3.6.B.2c)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Trailing arm has slight play in a pin/bush (2.4.G.2)
Offside Rear Trailing arm has slight play in a pin/bush (2.4.G.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Exhaust has part of the system slightly deteriorated (7.1.1a)
sills not checked due to plastic covers
How Reliable is the Honda Civic Aerodeck?
Based on 54,884 MOT tests across 4,141 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
S212 FMW is a 1998 Honda Civic Aerodeck in Red with a 1,493cc petrol engine. This vehicle has been through 26 MOT tests with a personal pass rate of 76.9%.
Across all 1998 Honda Civic Aerodeck models, the average MOT pass rate is 64.2% with a typical mileage of 96,841 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Honda Civic Aerodeck fails its MOT is constant velocity joint gaiter split, accounting for 2,938 recorded failures. If you're considering buying S212 FMW, it's worth having these areas checked by a mechanic before committing.
The Honda Civic Aerodeck typically stays on UK roads for around 28 years. At 28 years old, this Honda Civic Aerodeck is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of S212 FMW?
You can check the full history of S212 FMW by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was S212 FMW registered?
S212 FMW is a 1998 Honda Civic Aerodeck, first registered on 1 August 1998.
Is S212 FMW safe to buy?
The MOT history for S212 FMW shows 26 tests with a 76.9% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does S212 FMW have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on S212 FMW. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.