MOT Status
ExpiredMileage
93,700 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre not fitted in accordance with side wall instructions worn on inner edge (4.1.D.1f)
Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is inadequately repaired (2.4.A.3)
Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive door step corroding (5.2.6)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
near side front tyre cracked and perished
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Stop lamp not working (1.2.1b)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Brakes imbalanced across an axle (3.7.B.5b)
Nearside Rear Brake hose excessively deteriorated (3.6.B.4d)
Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Rear Brake hose excessively deteriorated (3.6.B.4d)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
22% imbalance on front service brake
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
bonnet safety catch stiff
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Headlamp not working on dipped beam (1.7.5a)
22% imbalance on front service brake
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
bonnet safety catch stiff
o/s wiper blade split
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Headlamp aim too low (1.8)
Nearside Registration plate lamp not working (1.1.C.1d)
Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Headlamp aim too low (1.8)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
o/s wiper blade split
Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
o/s and n/s outer sills starting to corrode
Front passenger door cannot be opened from outside the vehicle (6.2.B.1b)
Offside Rear Braking system leaking (3.6.A.1)
Coolant leak
Front Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
o/s and n/s outer sills starting to corrode
Front Exhaust has part of the system slightly deteriorated (7.1.1a)
Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Front Exhaust has part of the system slightly deteriorated (7.1.1a)
Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
Nearside Front Brake hose excessively deteriorated (3.6.B.4d)
Offside Front Brake hose excessively deteriorated (3.6.B.4d)
Offside Headlamp not working on dipped beam (1.7.5a)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
S243 BWC is a 1998 Ford Ka in Blue with a 1,299cc petrol engine. This vehicle has been through 18 MOT tests with a personal pass rate of 55.6%.
Across all 1998 Ford Ka models, the average MOT pass rate is 62.2% with a typical mileage of 62,348 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying S243 BWC, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 28 years old, this Ford Ka is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of S243 BWC?
You can check the full history of S243 BWC by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was S243 BWC registered?
S243 BWC is a 1998 Ford Ka, first registered on 30 October 1998.
Is S243 BWC safe to buy?
The MOT history for S243 BWC shows 18 tests with a 55.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does S243 BWC have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on S243 BWC. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.