MOT Status
ValidMileage
192,079 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Central Stop lamp(s) with a multiple light source up to 1/2 not functioning (4.3.1 (a) (i))
Nearside Front Inner Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Inner Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Radiator support corroded
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Rear Body component corroded and likely to cause injury wheel arch (6.2.1 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))
Nearside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i))
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))
Offside Rear Body component corroded and likely to cause injury wheel arch (6.2.1 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced cross member (6.1.1 (c) (i))
Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced cross member (6.1.1 (c) (i))
Offside Front Tyre tread depth below requirements of 1.6mm 215/60/15 (5.2.3 (e)) DANGEROUS
Nearside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Front Service brake binding but not excessively (1.2.1 (f))
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Nearside Rear Tyre worn close to legal limit/worn on edge bald outside edge (5.2.3 (e))
Nearside Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Tyre worn close to legal limit/worn on edge bald inside edge (5.2.3 (e))
Offside Rear Tyre worn close to legal limit/worn on edge bald inside edge (5.2.3 (e))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Rear wheel arches corroded
Central brake light partially inoperative
Front cross member corroding
Nearside Rear wheel arch area corroding
Offside Front fog light lense broken
Rear cross member corroding
previous weld repairs carried out on vehicle
Front Vehicle structure is corroded but structural rigidity is not significantly reduced cross member corroded and holed (6.1.1 (c) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced cross member corroded and holed (6.1.1 (c) (i))
Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Front Vehicle structure is corroded but structural rigidity is not significantly reduced cross member corroded and holed (6.1.1 (c) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced cross member corroded and holed (6.1.1 (c) (i))
Spare tyre flat
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement front bush (5.3.4 (a) (i))
Nearside Rear wheel arch corroded
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement front bush (5.3.4 (a) (i))
Oil leak, but not excessive engine (8.4.1 (a) (i))
Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))
Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Front Service brake excessively binding (1.2.1 (f))
Offside Rear Tyre tread depth below requirements of 1.6mm 215/60/15 (5.2.3 (e)) DANGEROUS
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement front bush (5.3.4 (a) (i))
Nearside Rear wheel arch corroded
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement front bush (5.3.4 (a) (i))
Oil leak, but not excessive engine (8.4.1 (a) (i))
Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))
Front Service brake binding but not excessively both (1.2.1 (f))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Offside Front fog light inop
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Offside Rear Tyre worn close to legal limit/worn on edge bald inside edge, 215/60/15 V (5.2.3 (e))
Offside Rear fog lamp not working (4.5.1 (a) (ii))
Front Service brake binding but not excessively both (1.2.1 (f))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Offside Front fog light inop
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Offside Rear Tyre worn close to legal limit/worn on edge bald inside edge, 215/60/15 V (5.2.3 (e))
Windscreen wiper blade defective both smearing (3.4 (b) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Suspension component mounting prescribed area is corroded but not considered excessive chassis out riggers (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))
Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement all 4 (5.3.4 (a) (i))
Nearside Front Service brake excessively binding (1.2.1 (f))
Offside Rear fog lamp not working (4.5.1 (a) (ii))
Nearside Rear Tyre has ply or cords exposed 215/60/15 (5.2.3 (d) (ii)) DANGEROUS
Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Suspension component mounting prescribed area is corroded but not considered excessive chassis out riggers (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))
Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement all 4 (5.3.4 (a) (i))
Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Front brake discs slightly pitted
Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Power steering ram(s) has slight seepage from a component (2.3.3b)
Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Power steering ram(s) has slight seepage from a component (2.3.3b)
Rear Brake pad(s) wearing thin (3.5.1g)
Unable to fully see front or rear brake pads
Offside Rear fog lamp not working (1.3.2b)
Unable to fully see front or rear brake pads
Rear fog lamp not working (1.3.2b)
Engine covers fitted obscuring some components in the engine bay
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Under-trays fitted obscuring some underside components
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Rear Shock absorber has a serious fluid leak (2.7.3)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Mazda MPV?
Based on 44,611 MOT tests across 3,157 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
S260 RYD is a 2013 Mazda MPV in White with a 1,998cc diesel engine. This vehicle has been through 24 MOT tests with a personal pass rate of 58.3%.
Across all 2013 Mazda MPV models, the average MOT pass rate is 68.0% with a typical mileage of 125,018 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda MPV fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 1,975 recorded failures. If you're considering buying S260 RYD, it's worth having these areas checked by a mechanic before committing.
The Mazda MPV typically stays on UK roads for around 31 years. At 13 years old, this Mazda MPV is still in the earlier part of its expected life.
Frequently Asked Questions
How do I check the history of S260 RYD?
You can check the full history of S260 RYD by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was S260 RYD registered?
S260 RYD is a 2013 Mazda MPV, first registered on 20 February 2013.
Is S260 RYD safe to buy?
The MOT history for S260 RYD shows 24 tests with a 58.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does S260 RYD have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on S260 RYD. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.