2010 Toyota Prius

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Coil spring corroded all (5.3.1 (b) (i))

Front both side headlamps have poor beam

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

both side sills and suspension mounting ares corroded

exhaust heat cover under fuel tank slightly insecure

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front headlights have poor beam

Suspension component corroded but not seriously weakened and mounting areas (5.3.3 (b) (i))

brake load sensing valve linkage in poor condition

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Coil spring corroded all (5.3.1 (b) (i))

Rear Tyre worn close to legal limit/worn on edge both side (5.2.3 (e))

brake low sensing valve link in poor condition

exhaust heat cover in poor condition under fuel tank

front and rear suspension components and suspension mounting areas corroded

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front headlamp has poor beam

Nearside Front link dust cover slightly damaged

Offside Front windscreen wiper slightly deteriorated

brake low sensing valve link in poor condition

under vehicle suspension components and suspension mounting areas corroded

Brake low sensing valve link in poor condition

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front headlights have poor beam

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear exhaust heat cover in poor condition

Under vehicle suspension components and mounting areas corroded

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Position lamp light intensity obviously reduced both side (4.2.3 (a) (i))

brake low sensing valve link in poor condition

exhaust heat cover slightly insecure under fuel tank

under vehicle suspension component's and suspension mounting areas corroded

Nearside Front head light have poor beam pattern

Offside Rear brake sensing valve link in poor condition

Rear Coil spring corroded both (5.3.1 (b) (i))

Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced both sides (6.1.1 (c) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive both sides (5.3.6 (a) (i))

Rear exhaust heat cover slightly insecure under fuel tank

Suspension component corroded but not seriously weakened front and rear (5.3.3 (b) (i))

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear exhaust heat cover slightly insecure under fuel tank

brake low sensing valve link in poor condition

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Suspension component corroded but not seriously weakened (5.3.3 (b) (i))

exhaust head cover insecure

load sensing valve in poor condition

Rear exhaust heat cover slightly insecure

brake low sensing valve link in poor condition

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Coil spring corroded front and rear (5.3.1 (b) (i))

exhaust heat cover in poor condition

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Suspension arm pin or bush worn but not resulting in excessive movement both side (5.3.4 (a) (i))

Offside Front anti roll link dust cover slightly damaged

Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Anti-roll bar linkage ball joint has slight play Both sides (5.3.4 (a) (i))

Front Tyre worn close to legal limit/worn on edge Both sides (5.2.3 (e))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Brake pipe excessively corroded (1.1.11 (c))

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Anti-roll bar linkage ball joint has slight play Both sides (5.3.4 (a) (i))

Front Tyre worn close to legal limit/worn on edge Both sides (5.2.3 (e))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Brake disc worn, pitted or scored, but not seriously weakened Both sides (1.1.14 (a) (ii))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement Front bush (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Suspension component pin or bush slightly worn (5.3.4 (a) (i))

offside rear tyre has a cut but deep enough to reach cords

Front Anti-roll bar pin or bush worn but not resulting in excessive movement both side (5.3.4 (a) (i))

Front Suspension arm pin or bush worn but not resulting in excessive movement both side (5.3.4 (a) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

play in steering rack inner joints

Engine covers fitted obscuring some components in the engine bay

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Under-trays fitted obscuring some underside components