MOT Status
ExpiredMileage
129,080 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Battery insecure and likely to fall from carrier (4.13 (a) (ii))
Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill and floor (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Rear Brake pipe excessively corroded (1.1.11 (c))
Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
under body corroded
Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Rear Sub-frame corroded but not seriously weakened and all attached suspension components (5.3.3 (b) (i))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Rear Lower Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Stop lamp(s) not working (4.3.1 (a) (ii))
Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Rear Sub-frame corroded but not seriously weakened and all attached suspension components (5.3.3 (b) (i))
Central Front Oil leak, but not excessive (8.4.1 (a) (i))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Headlamp lens seriously defective (4.1.1 (b) (ii))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Central Front Oil leak, but not excessive (8.4.1 (a) (i))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Oil leak crankshaft pulley ()
Parking brake lever has little reserve travel (3.1.6b)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Nearside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Headlamp not working on main beam (1.7.5a)
Offside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Rear fog lamp missing (1.3.2a)
Offside Registration plate lamp not working (1.1.C.1d)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Oil leak crankshaft pulley ()
Parking brake lever has little reserve travel (3.1.6b)
osf and osr tyres perishing between tread pattern
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Rear Tyre not fitted in accordance with side wall instructions (4.1.D.1f)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Stop lamp not working (1.2.1b)
Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Rear fog lamp has less than 50% of the light sources illuminating (1.3.2b)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
osf and osr tyres perishing between tread pattern
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Nearside rear brake binding (3.7.B.1)
Brakes imbalanced across an axle (3.7.B.5b)
Horn not working (1.6.2a)
Offside Rear position lamp(s) not working (1.1.A.3b)
Offside Registration plate lamp not working (1.1.C.1d)
Offside Stop lamp not working (1.2.1b)
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Under-trays fitted obscuring some underside components
nearside and offside rear axle tierod bar rear bushes slightly deteriorated
nearside rear and front tyre sidewalls slightly damaged
some brake judder at nearside and offside front
some brake judder at nearside rear
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Nearside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Anti-roll bar linkage fractured (2.4.G.1)
Oil leak
nearside and offside rear axle tierod bar rear bushes slightly deteriorated
nearside rear and front tyre sidewalls slightly damaged
no timing belt covers fitted and moving parts exposed
some brake judder at nearside and offside front
some brake judder at nearside rear
Child seat fitted not allowing full inspection of adult belt
Nearside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Offside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Oil leak
advise n/s/f tyre damaged on sidewall
Horn not working (1.6.2a)
Offside Rear Body has a sharp edge caused by damage (6.1.C.1)
Offside Registration plate lamp not working (1.1.C.1d)
Offside Stop lamp not working (1.2.1b)
Rear fog lamp not working (1.3.2b)
Child seat fitted not allowing full inspection of adult belt
Nearside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Offside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Oil leak
advise n/s/f tyre damaged on sidewall
Child seat fitted not allowing full inspection of adult belt
advise both o/s tyres damaged on side walls
Nearside Headlamp aim too low (1.8)
Offside Headlamp aim too low (1.8)
Offside Registration plate lamp not working (1.1.C.1d)
Rear Rear fog lamp not working (1.3.2b)
Child seat fitted not allowing full inspection of adult belt
advise both o/s tyres damaged on side walls
Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)
Horn not working (1.6.2a)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
How Reliable is the Mazda Bongo?
Based on 251,584 MOT tests across 14,362 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
S303 TCV is a 1998 Mazda Bongo in Silver with a 1,990cc petrol engine. This vehicle has been through 19 MOT tests with a personal pass rate of 47.4%.
Across all 1998 Mazda Bongo models, the average MOT pass rate is 67.1% with a typical mileage of 125,789 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda Bongo fails its MOT is fog lamp not working, accounting for 6,854 recorded failures. If you're considering buying S303 TCV, it's worth having these areas checked by a mechanic before committing.
The Mazda Bongo typically stays on UK roads for around 31 years. At 28 years old, this Mazda Bongo is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of S303 TCV?
You can check the full history of S303 TCV by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was S303 TCV registered?
S303 TCV is a 1998 Mazda Bongo, first registered on 1 December 1998.
Is S303 TCV safe to buy?
The MOT history for S303 TCV shows 19 tests with a 47.4% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does S303 TCV have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on S303 TCV. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.