2010 Mazda Bongo

Offside Rear Service brake excessively binding (1.2.1 (f))

Service brake efficiency below requirements (1.2.2 (a) (i))

Coolant leak

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Nearside Rear Tyre slightly damaged/cracking or perishing HEAVILY CRACKED AND PERISHED (5.2.3 (d) (ii))

Offside Rear Tyre slightly damaged/cracking or perishing HEAVILY CRACKED AND PERISHED (5.2.3 (d) (ii))

Offside Rear Service brake excessively binding (1.2.1 (f))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Nearside Rear Tyre slightly damaged/cracking or perishing HEAVILY CRACKED AND PERISHED (5.2.3 (d) (ii))

Offside Rear Tyre slightly damaged/cracking or perishing HEAVILY CRACKED AND PERISHED (5.2.3 (d) (ii))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))

Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength crossmember (5.3.6 (a) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

both inner front sills rusty

lower front x member rusty

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge inner edge/ wearing unevenly (5.2.3 (e))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Suspension component mounting prescribed area is corroded but not considered excessive Front cross member (5.3.6 (a) (i))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Offside Front Position lamp not working (4.2.1 (a))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge inner edge/ wearing unevenly (5.2.3 (e))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Suspension component mounting prescribed area is corroded but not considered excessive Front cross member (5.3.6 (a) (i))

Heavily under sealed

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (2.4.A.3)

Under tray fitted

Signs of coolant leak

Under tray fitted

Offside Rear Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Signs of coolant leak

Under tray fitted

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)

Oil leak

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)

Offside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)

Nearside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)

Oil leak

Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Offside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Offside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

offside front tyre wearing uneven

Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Rear Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

both rear tyres and nearside front tyre starting to wear uneven on outer edges

slight corrosion to both front inner sills

slight corrosion to offside rear outer sill

Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

centre and rear exhaust corroded

wipers poor condition

Nearside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Rear Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Offside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

centre and rear exhaust corroded

wipers poor condition

Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)

Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Track rod end ball joint dust cover damaged, but preventing the ingress of dirt (2.2.C.1c)

Offside Rear Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Track rod end ball joint dust cover damaged, but preventing the ingress of dirt (2.2.C.1c)

brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Front Brake pad(s) wearing thin (3.5.1g)